Do you not know how to use the anti-lost device? What are the anti-lost device manufacturers? Shenzhen Arrizo Electronics Co., Ltd. is mainly engaged in the production of electronic anti-lost devices for women and women.
The use of electronic anti-lost device:
1, anti-lost function: the receiver control dial to the maximum receiving distance, the power switch dial to: "anti-lost N-ON", issued a "click" sound of a boot prompt, then the receiver issued: "嘀 ... 嘀..." Waiting for a learning tone, at this time the net transmitter power switch is turned to ON, the transmitter signal light flashes, and the signal is sent. After the receiver receives the signal of the body signal, it sends out: The light flashes, indicating that the learning code is successful.
Note: If the receiver is turned on (while the transmitter is turned off), two “learn†success tone sounds. Check if there are other transmitters working. If the transmitter is turned on, the receiver still emits: "嘀...嘀..." waiting for a learning tone, indicating that no transmitter signal has been learned. Please check whether the position of the control wheel is in the correct direction and whether the transmitter is working properly.
2. After successfully learning the code, you can push the distance control wheel to set the appropriate distance for the object to be protected. It is recommended that the distance between items such as bags and purses is generally set at about 3 meters, and children or pet animals are relatively far away. The situation is self-determined.
3. When the object to be protected is away from the set distance, the receiver will alarm (a warning sound will be heard from the product, and vibration and warning signs will be given if there is a vibration mark).
4, find the function: the receiver power switch dial to "find the S-ON" Department, this time the receiver issued a "hello" waiting for learning prompt tone, when receiving the transmission signal, the receiver issued "嘀嘀嘀嘀"The alert sound is close to the sound and vibration (product with vibration), it is convenient to find the object to be protected. If it leaves the receiving area, the receiver's signal light will be on without warning.
5. The transmitter is hung on the object of protection and the receiver is attached to himself or the owner.
The use of electronic anti-lost device:
1, anti-lost function: the receiver control dial to the maximum receiving distance, the power switch dial to: "anti-lost N-ON", issued a "click" sound of a boot prompt, then the receiver issued: "嘀 ... 嘀..." Waiting for a learning tone, at this time the net transmitter power switch is turned to ON, the transmitter signal light flashes, and the signal is sent. After the receiver receives the signal of the body signal, it sends out: The light flashes, indicating that the learning code is successful.
Note: If the receiver is turned on (while the transmitter is turned off), two “learn†success tone sounds. Check if there are other transmitters working. If the transmitter is turned on, the receiver still emits: "嘀...嘀..." waiting for a learning tone, indicating that no transmitter signal has been learned. Please check whether the position of the control wheel is in the correct direction and whether the transmitter is working properly.
2. After successfully learning the code, you can push the distance control wheel to set the appropriate distance for the object to be protected. It is recommended that the distance between items such as bags and purses is generally set at about 3 meters, and children or pet animals are relatively far away. The situation is self-determined.
3. When the object to be protected is away from the set distance, the receiver will alarm (a warning sound will be heard from the product, and vibration and warning signs will be given if there is a vibration mark).
4, find the function: the receiver power switch dial to "find the S-ON" Department, this time the receiver issued a "hello" waiting for learning prompt tone, when receiving the transmission signal, the receiver issued "嘀嘀嘀嘀"The alert sound is close to the sound and vibration (product with vibration), it is convenient to find the object to be protected. If it leaves the receiving area, the receiver's signal light will be on without warning.
5. The transmitter is hung on the object of protection and the receiver is attached to himself or the owner.
Plastic Grade Titanium Dioxide
Tanium Dioxide Powder,High Weather Resistance Sulfuric,Tio2 Strong Achromatic Power,Plastic Grade Titanium Dioxide
Yibin Tianyuan Group , https://www.ybtyco.com