Composite floor installation common four major issues

1. The reason for the sound of empty drums is caused by improper fixation. The main reason is that the number of hair boards and keels, the number of hair boards and floor nails is small or the nails are not firm. Sometimes it is caused by shrinkage of the moisture content of the board or the glue is not qualified. To. Therefore, the process of rigorously testing the moisture content of the board and the quality of the adhesive is particularly important. It can be used only after passing inspection. The nail should not be too small during installation.

2. The main reason for the unevenness of the surface is the unevenness of the grass roots or the deformation of the floor planks. During construction, the level of the keel is leveled with a level ruler, and if it is not, it should be adjusted. Ventilation slots should be made on the keel. A 10 mm ventilation gap should be left on the board margin wall. The insulation material must be dry to prevent the wood from picking up the damp drum. The flatness of the wooden floor surface should be within 1 mm.

3. Reasons for lax seams In addition to the non-standard installation during construction, the large width and dimensional errors of the plates are also important reasons.

4. The main reason for the partial buckling is not only due to the moisture deformation of the board, but also the patchwork seams of the wool board are too small or seamless, and the water leaking from the hoses during use is caused by wet floors. After the floor is covered, the paint on the floor paint should be complete. In daily use, water should be prevented from flowing into the lower part of the floor, and the surface water must be cleaned in time.

Flooring purchase Flooring Natural floor paint

Gypsum finishing plaster is used to provide better leveling and smoother surface to the wall. In this application, YICHENGE HPMC plays a vital role in improving water retention, adhesion strength and workability.

Gypsum is a soft sulfate mineral composed of Calcium sulfate dihydrate (CaSO4:2H20). It is widely used as a fertilized, in mould, in sculptures and as plaster material.

Gypsum is a chalk like material and is very light in weight. It is available in crystalline form in nature.

In recent years, the construction sector has witnessed a number of new trends, technology advancements and innovations across applications, all aimed at making construction faster and delivering higher performance. Gypsum although a much older material than the cement & sand plaster has rarely been used extensively in construction industry. Now a days, Gypsum has proved to be a miraculous material aiding interior construction due to its properties.

HPMC For Gypsum Finishing Plaster

HPMC For Gypsum Finishing Plaster,Adhesive Finishing Plaster,Water Retention Finishing Plaster,Different Viscosity Gypsum Finishing Plaster

JINZHOU YICHENG CELLULOSE CO.,LTD. , http://www.hbyichenggroup.com

This entry was posted in on