Detailed discussion on the cooperation and adjustment methods of "high-speed bearings"

Home>Bearing knowledge>Details on the cooperation and adjustment methods of "high-speed bearings"
/*728*90 created on 2018/5/16*/ var cpro_id = "u3440131";

Detailed discussion on the cooperation and adjustment methods of "high-speed bearings"

Source: China Bearing Network Time: 2013-07-17

/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';
.1) Scale changes and hardness changes from normal temperature to high temperature,
.2) Force changes and shape changes caused by centrifugal force at high speed.
In the high-speed and high-temperature conditions; from the cooperation and clearance selection, we must strive to adhere to the bearing precision and work function; this is difficult to ensure the deformation of the raceway after the bearing device. Manganese 螅 咚傧 咚傧 睦胄 睦胄 睦胄 睦胄 呶孪 呶孪 娜 娜 蛘 蛘 蛘 蛘 蛘 蛘 蛘 蛘 蛘 蛘 蛘 蛘 蛘 蛘 蛘 蛘 蛘 蛘 蛘 蛘 蛘 蛘 蛘 蛘 蛘 蛘Under the premise, it is prudently accounted for; the useful interference at normal temperature and normal speed may be invalid for high speed bearings.
If the result of the calculation is too large (usually as long as it is under ultra-high speed); as long as the two-layer smooth method of the under-smooth smoothing method and the static-pressure smoothing method is adopted; and such a plan may make the dmn value of the bearing Break the 3 million mark.
In thinking about the high-speed bearing clearance, not only must consider the above factors; but also consider the influence of the thermal elongation of the shaft on the clearance; the bearing needs to be in the working condition; that is, the optimal clearance at the working temperature; The kind of play is formed under the condition of accurate alignment between the inner and outer ring grooves. Because the high-speed bearing strives to reduce relative sliding and internal conflict; the best way is to adjust the inner and outer rings relative to each other in the axial direction. The clearance of the ball bearing.
When thinking about the cooperative interference and clearance of the bearing; pay attention to the characteristics that the data becomes soft and simple deformation at high temperature; and the temperature change from normal temperature to high temperature repeatedly leads to the possibility of permanent eternal deformation.
2. Demand for mainframe-related parts High-speed bearing demand The bearing position reversal system passes fine dynamic balance; the bearing parts of the shaft and the seat hole device should have higher dimensional accuracy and shape accuracy than the usual requirements; especially the coaxiality and The straightness of the shoulder to the seat hole or journal; while considering the time of these problems; it is necessary to pay attention to the high-speed and high-temperature elements of the bearing operation.
The shaft support system requires both high rigidity and the required quality as light as possible; in order to overcome this opposition; it can adopt methods such as reducing the appearance roughness and improving the appearance reinforcement to improve the support stiffness; using the hollow shaft to reduce the system quality.
3. Development examples of ultra-high speed bearings are based on the development of ultra-high speed HA-type tapered roller bearings.
.1) The problem is raised in gas turbines and some machine tools and engineering machinery; high speed and axial load are large; the application of ball bearings is too short; the use of short cylindrical roller bearings is lack of axial load; axial clearance Difficult to adjust; expect to use tapered roller bearings to break this problem.
.2) Skills to be dealt with. The skill of high-speed restraint of tapered roller bearings is to improve the smoothness between the large ribs of the inner ring and the large end faces of the rollers; this part is most prone to severe wear and burn at high speed; The main reason for constraining its speed.
.3) Treatment method In the general layout of tapered roller bearings; smooth oil flow path is difficult to obtain smooth oil on the inner ring large rib and the large end face of the roller; this part is relatively large sliding; it is the most demanding smooth oil.
Therefore, Japan and other countries have developed HA-type tapered roller bearings; this bearing rib is on the outer ring; this smooth oil can smooth the outer ring rim and the touch surface of the roller's large end face; together here even when stopped It can also store some oil; it prevents the oil from burning when starting; but there are several oil drain holes on the outer ring ribs according to the demand; to prevent the oil from discharging the passage; the power loss and temperature of the oil mixture formed in a certain part Raise too high. Because the inner ring has no ribs; the temperature has dropped; therefore, the possibility of seizure activity between the inner ring and the shaft is reduced. This type of bearing supports the outer ring guiding method for the support frame; The frame can guide the roller to work smoothly without tilting; prevent seizure and excessive wear; this is also beneficial to high speed.
.4) Achievable effect The HA-type bearing has a dmn value of up to 2 million; twice the advancement of the general layout; for example, for bearings of a gas turbine reducer spindle (model I-IA30205); Under the condition of 1000N load; ensure that there is 2L/min oil supply to the bearing to supply circulating No. 4 turbine oil; its working speed can reach 60,000 revolutions without causing burns.
Recommend to friends comments close window

Bearing related knowledge
Key skills in bearing production
LYC deep groove ball bearing function detailed
Koyo bearing cracking edge and cracking failure to improve the Beijing 130 type of automotive shaft guide bearing disassembly method What is the primary problem of sliding bearings?


This article links to http://
Please indicate the bearing network http://

Previous:The basic functional requirements of rolling bearings for data Next:A brief analysis of the causes and sweeping methods of fan bearings

Ningbo Actmix Produce the organic blowing agent Actmix®ADC-50GE & Actmix®OBSH-50GE, which application for the manufacture of sponge and foam rubber articles based on natural and synthetic rubbers. The foaming temperature from 150℃ to 210℃.Lower mooney viscosity at lower temperature(50℃), with high dispersiblity,ensure the foaming rubber parts with uniform fine structure.

Ningbo Actmix produce the microsphere foaming agent Actmix®HDU/GE Actmix®LDU/GE, with stable perfoamance, non-flammable, non-pollutin, non-toxic and tasteles, do not corrode the mold, non-staining the rubber parts; which are widly application for the Sealing strip, sold and lightweight rubber products, etc.

Rubber Foaming Agent

Rubber Foaming Agent,EPDM Foaming Agent,Pre-dispersed Rubber Foaming Agent,Rubber Foaming Agent ADC-50

Ningbo Actmix Rubber Chemicals Co., Ltd. , http://www.actmixchemicals.com

This entry was posted in on