Frosted glass partitions are widely used in modern kitchen and bathroom decoration, and many leading offices and training rooms are also commonly used for frosted glass partitions. The effect of light transmission and non-perspective is very useful in modern life. The frosted glass partition has a good decorative effect, is fashionable and beautiful, and can also play a certain role in protecting privacy. Let's take a look at how to get a frosted glass partition.
Frosted glass, also known as frosted glass, dark glass. It is made by using ordinary flat glass by mechanical blasting, manual grinding or hydrofluoric acid etching to treat the surface into a uniform surface. Due to the rough surface, the light produces diffuse reflection, light transmission and no perspective, which can make the indoor light soft and not glaring. Commonly used in concealed bathrooms, bathrooms, office doors and windows and partitions. The outer frame of the frosted glass partition is made of aluminum, and the surface materials are non-combustible or flame retardant materials. The reason why frosted glass partitions are so popular is that there are more choices for home decoration because of the variety of frosted glass partition patterns. Many of the frosted glass partition frames now have sealing strips for higher sound insulation and sealing.
1 frosted glass partition price
Frosted glass partition, glass wall thickness is divided into 5mm, 8mm, 10mm, 12mm, the most expensive is 12mm plus design fee, plus stainless steel skeleton is 400--450 yuan per square meter, which is reduced by 30-50 yuan. This is a public offer, and there are differences in prices in different regions.
2 frosted glass partition features
The frosted glass partition is divided into single-layer frosted glass partitions and double layers. According to the owner's requirements for transparency, the single-sided or double-sided matte can be designed for the partition, and the price is also different. There are many types of frosted glass partition patterns, and the sound insulation effect is super good and has a fireproof function.
Frosted glass partition installation
1. Use double-sided adhesive tape to absorb the bottom of the ground rail, then place the ground rail in a fixed position, fix it with the expansion plug and the nail, then pop the vertical line on the wall according to the design size, and pop the partition position on the ground and the ceiling. .
2. Use the main keel to hit the ceiling, perpendicular to the ground rail, and then make the lower half on the popped position line according to the drawing requirements, and anchor the structure with both ends.
3. Insert the main keel connector into the ground rail and the main keel, and connect them. According to the design requirements, fix the main keel with 4 inch nails. The keel should be fixed at least three nails at each end. It must be installed firmly. .
4, according to the design requirements according to the position of the line, with the button or nail to fix the small keel, also must be installed firmly. Before installing the small keel, the glass groove can also be installed on the small keel according to the specifications of the installed frosted glass partition.
5. Install frosted glass: Install on the small keel according to the specifications of the frosted glass; if it is installed with the bead, first fix the bead on the side of the glass, and use the rubber pad to under the glass, and then fix the glass with the bead; if directly fixed with glass glue Glass, the glass should be installed in the small keel reserved groove, and then sealed with glass glue.
6, glass glue: first along the glass around the paper tape, according to the design requirements, all kinds of glass glue evenly between the glass and the small keel. After the glass glue is completely dry, tear off the paper tape.
7. According to the design requirements, the strips of various specifications should be fixed to the small keel with straight nails or glass glue. If the design does not require, then you can use 10 × 12mm wood bead, 10 × 10mm aluminum bead or 10 × 20mm stainless steel bead as required.
Frosted glass partitions have better privacy than tempered glass partitions and are very suitable for everyone. Today's Xiaobian's introduction is here, more relevant information, so stay tuned for the follow-up report of Xiaojiaju.com.
High Polymer self-adhesive film waterproofing roll material is one kind multi-Iayer composite waterproof material with superior performance , including one layer high density polyethylene (HDPE) membrane , one layer high polymer self-adhesive film and one reaction sand or isolation membrane layer go through specially treated. And it has self-healing function , after reaction and consolidation with concrete slurry , forming a waterproof layer to gapless combined with concrete structure , eradicating water breakthrough, efectively improving the reliability of waterproofing system.
NCL HIGH POLYMER SELF-ADHESIVE FILM WATERPROOFING ROLL MATERIAL
HIGH POLYMER SELF-ADHESIVE RUBBER ASPHALT WATERPROOFING ROLL MATERIAL
HIGH POLYMER SELF-ADHESIVE BACK-LINER RUBBER ASPHALT WATERPROOFING ROLL MATERIAL
Executive Standard:
GB/T 23457-2009 GB/T23260-2009
Specification:
Width:2m Thickness: 1.2mm , 1.5mm , 2.0mm.
Length: 20-30m (Can be customized according to user needs)
Application:
Various underground caves , tunnels , subways , bridges ,basements , water conservancy dams , landfills , sewage treatment pond, municipal construction and other waterproofing anti-seepage projects.
High Polymer Self-Adhesive Film Waterproofing Material
High Polymer Self-Adhesive Film Waterproofing Material,Waterproof Roll Material,Polymer Self-Adhesive Waterproof Material,Polymer Self-Adhesive Waterproof Membrane
Shandong Tianhai New Materials Engineering Co., Ltd , https://www.chinatinhy.com