For glazed tiles, the glaze layer of the brick surface is a very dense substance. The colored liquid or dirty things will not penetrate into the brick body. The contamination of the brick surface is wiped with a rag or some washing spirit. The surface can remove the dirt on the brick surface. If it is a tile with strong unevenness and a lot of dust is squeezed in the concave and convex gap, use a brush and then rinse with water to remove the dirt on the brick surface. Tile dirt cleaning method:
Method / step
First squeeze a proper amount of toothpaste on the brush and then directly brush the seams of the tile. The amount of toothpaste can be determined according to the actual situation of the oil on the tile joint. Because the direction of the tile joint is vertical, when brushing, it should also be brushed longitudinally so that the oil can be cleaned. In addition, the main raw materials for the tile joints are putty and white cement, so it is difficult to scrub after the oil adheres to it, and the toothpaste has a strong cleaning effect, so choose it as a cleaning tool. However, the tile and tile joints behind the cooktop are easily stained with oil. It is very troublesome to clean this time. What should I do? There is also a trick, the key tool is this ordinary candle.
Gently apply the candle to the tile joints, first in the longitudinal direction, so that the candles can be evenly applied to the seams; then apply horizontally so that the thickness of the candle and the thickness of the tile are the same. Why do you want to apply a candle? Because the surface of the candle is smooth, even if there is oil on it, it will be cleaned with a gentle rub. In the future, clean the oil on the tile and tile joints behind the cooktop, just scrub with detergent.
The key to this trick is to use a toothpaste to clean the oil on the tile joints behind your kitchen stove, and apply a candle at the seam to make the tile joints less contaminated.
First look at polished tiles or antique tiles. If it is a polished brick, it can't be washed. Because the traditional polished tiles (ground tiles) have polished surfaces and shiny surfaces, there are pinholes on the polished tiles. If the stains penetrate, the pattern can only be lightened. Antique bricks and wall tiles can be washed away but it is a hassle.
Different detergents should use different detergents:
Animal and vegetable fat, beer, coffee, ice cream, etc. can be washed with sodium hydrogen fluoride or potassium hydrogencarbonate.
Precipitate, ink, rust, mortar, agricultural tea, rubber, etc. can be cleaned with dilute hydrochloric acid, dilute nitric acid, dilute oxalic acid, dilute sulfuric acid
Paint and drawing pen can be cleaned with turpentine, pyruvic acid or alkali
Coke and vinegar can be cleaned with acid or alkali
Mud water can be washed with linseed oil
Very polluted special all-purpose water cleaning
Daily cleaning household cleaner or detergent cleaning
Daily maintenance and cleaning of tiles:
Remove oily tiles. Daily cleaning can be done with detergent, soap, etc.
Add a little bit of ammonia and turpentine to the soap and clean the tiles to make the tiles more shiny.
Polished tiles should be waxed regularly, with a time interval of 2-3 months.
If there is a scratch on the brick surface, apply the toothpaste on the scratch and wipe it with a dry cloth to repair it.
From the gap between the brick and the brick, the decontamination paste can be used to remove the dirt from time to time, and then a layer of waterproofing agent is applied in the gap to prevent mold growth.
Contaminants such as tea, coffee, beer, ice cream, grease, etc. use sodium hydroxide or potassium bicarbonate solution.
Contaminants such as hydrochloric acid and nitric acid are used as contaminants such as ink and cement.
Special cleaning agents for paints, paints and other contaminants.
The rust can be removed by washing with 2% oxalic acid solution, and then wiped with water. After pulverizing with 3-4 vitamin C tablets, sprinkle it on the surface of the floor tile and then wash it with water several times to remove rust stains. If it is rust stain, use 10% oxalic acid, citric acid and water mixture to soak the rust, then wipe it again with concentrated brine. If you have fresh lemon, you can squeeze out the juice and rub it on the rust stains, and repeat it several times until the rust stains are removed, then wash it with soapy water.
All kinds of glue can be removed with banana water. Pure banana water is a colorless, transparent and volatile liquid. It has a strong banana smell, is slightly soluble in water, soluble in various organic solvents, and is flammable. It is mainly used as a solvent for painting. And thinner.
Measuring Tape MID certification; ISO9001 certification;
1. Measuring tape Case: First-grade new ABS plastics: Bright, odorless.
2. Graduation: British-metric; metric; British; Luban etc.
3.Measuring tape Blade: steel,white and yellow colors,matt and shiny or chromed
4. Hook: Magnetic or common (it depends on custom request) the hook is flexible
5. Rivets: 3or 2 rivets hook reduces risk of breakage; the rivet can be fastened to a proper position
6. Belt: The belt is made with Nylon for more handy and durable
7. Measuring tape Size: 1m/3ft-10m/33ft
Free Samples
We will offer you free sample within 5 working days after your comfirmation of details and invoice.
Quality Guarantee
We will check the products strictly one by one before arranging the shippment.
Price Discount
We will give discount to the long term business partners or the big order.
Customized Service
We can offer the OEM service based on clients' requirements such as the color,label or the package,etc.
Measuring Tape
*Impact resistant rubberized case;
*Heat-treated spring provides long life and smooth blade rewind;
*Strong belt clip
3M Measuring Tape,3 Metre Tape Measure,Stanley 3M Tape Measure,3 Meter Tape Measure
Oukelong Tools Co.,Ltd , https://www.oukelongtape.com