Everyone will install a security door with good quality and good appearance when decorating a new house. In order to prevent dust from being contaminated by each piece of security door, and to protect the surface of the paint from being easily scratched, there will be a protective film. In general, the protective film on the anti-theft door is after the completion of home renovation, even after a long time to live in. But this time it will be found that it is not easy to tear off. Today, Xiao Bian came to tell everyone how long the protective film on the security door was removed . 
How to remove the protective film on the security door for a long time
The protective film on the security door for a long time, Xiao Bian teach you to easily tear off the protective film.
1. Clever use of alcohol
Prepare a little alcohol at home, then use a paper towel dipped in some alcohol (preferably industrial alcohol, do not have to use medical treatment also) wipe, in general, more than a few clicks, the protective film will be cleaned very clean.
2. Magical effect of Fengyoujing
In the case of windy oil at home, use a towel with a small amount of balm and gently wipe the security door. The use is less and thorough, and the best thing is that it can remove these residual gums extremely quickly and easily, which is better than sprinkling the essence.
It can be said that the above two methods are relatively effective methods. 
3. Use nail polish
The nail polish is generally not something that every family will have, so it may not be very convenient. If you just have nail polish in your home, the usage is the same as the usage of alcohol. The effect is also very good. And for the quality of nail polish is not required, good or general will do, as long as it can wash off the nail polish on it.
4. Use hand cream
Is it surprising that you use hand cream? Hand creams are used in many households, especially in this cold, dry winter, which is almost every family must have. Closer to home, we can tear off the printed products on the anti-theft door membrane first, then squeeze the hand cream on top, and then the thumb slowly goes to bed, and after a short while, we can put the protective film on it. The glue has fallen for the first time, but this may be a bit slower. 
5. Use banana water
Banana water should have been heard by many people. It is an industrial dosage for removing paint. The general store selling paint can be easily purchased. The method used is the same as the method of using alcohol.
6. Apply a hot towel
If you use a lot of methods do not work, you can try hot water, and then tear it off. 
Editor's summary: The above is the introduction of Xiaobian 's protection film on the anti-theft door for a long time . After reading this song, is it not a long time for the protective film on the security door? What do you know? In the face of such problems in life, we can try the above methods, I hope this article can help everyone.
A Noise Barrier (also called a soundwall, sound berm, Sound Barrier, or acoustical barrier) is an exterior structure designed to protect inhabitants of sensitive land use areas from noise pollution. Noise barriers are the most effective method of mitigating roadway, railway, and industrial noise sources – other than cessation of the source activity or use of source controls.
Specification of sound barrier:
1.Material: PC Acrylic board, plastic panle, steel sheet or aluminium sheet
2.Inner material:Glass wool
3.Sheets thickness:0.8-1mm, can be customized
4.Panel size:Width-500mm, Length2000mm, can be customized
5.Packaging Detailssteel pallet and plastic film
|
Material |
Width |
Length |
Thickness |
|
Acrylic board :PE PMMA resin |
100mm-1500mm |
2000-2500mm |
8mm-10mm
|
|
Metal sheet :aluminiun steet or galvanized steel sheet Inner Material:Glass wool |
500mm-1000mm |
2000mm-4000mm |
70mm-100mm |
Sound Barrier
Sound Barrier,Sound Barrier Construction,Construction Sound Barrier,Road Sound Barriers
Anping shengsen metal wire mesh products co,. ltd , https://www.apshengsen.com