Now I like to drink my own juice and drink. Health and safety can also be selected according to my preferences. How to use juicer ? Obviously, this problem cannot be generalized. Different types of juice extractors naturally have their own advantages and disadvantages. We must decide which kind of juicer to choose based on our actual needs. The following small series briefly introduces how to use the juicer .
·How to use juicer
1, for the use of juicer when the position can not be tilted, and should not be placed firmly loose, choose to place the juicer must be flat.
2. Before using the product, check whether the juicer's props and filters are in place. After confirming, confirm that the cup body is securely installed.
3. Before the food or fruit is squeezed, it should be cut into pieces suitable for the inlet size of the juicer, and then placed in the juicer.
4, plug in the juice before the juice, we must ensure that the truth.
5, start the machine, confirm that the motor can run normally.
6, the food into the cup body, to maintain a uniform speed, to avoid too fast and too fast movements, so as to avoid unnecessary danger.
7. After the food is processed, unplug the power supply and pour out the processed food. There must be a sequence!
8, carefully clean the juicer inside and outside the various components, but to avoid the flow of water into the motor.
9. Put the juicer completely dry in a well-ventilated place. This will help maintain the life of the juicer!
·Juicer Notes
1. After fruit juice, the nutrient content will be greatly reduced. If the fruit is not dried within 15 minutes, his nutrition will be reduced to 0. The best method is to use a piece of gauze after disinfection, hand-pressed Juice, nutrition can slightly retain some.
2. If the juicer is used for the first time, it must be used strictly according to the instruction manual of the juicer. Don't open it until the juicer does not stop turning. About the juicer purchase method knowledge can refer to the following information link, I hope you can buy the right juicer for you.
Information on how to use the juicer is introduced here for everyone. I hope this article will help you. If you still have anything you don’t understand, you can follow our website and we’ll get back to you as soon as possible.
Fruit and Vegetable Juicers Fruit Juicers Juicers Brand Juice Extractors Juice Extractors
Link Fitting is used for insulators, Suspension Clamp, clamp and protection fittings connected to form a suspension or tension string set of fittings. It includes U Type Shackle , Zbs Clevise , Yoke Plate , Parallel Clevis, Ball Eye , Adjustment Plate, Extension Ring , Socket Clevis , Ball Clevis , Right Angle Hung Plate.
Link Fittings are used to link clamps to insulator, or to link insulator and ground wire clamps to tower arms or subjection structures. Link fittings have special type and common type in accordance with mounting condition. The special type includes the ball-eye and socket-eye linking with insulators. The common type is usually pin connected type. They have different grades according to the load and are exchangeable for the same grade.
If you have any questions, please contact with us directly.
Our company is solemnly committed to the majority of customers: reasonable price, short production cycle, considerate service. We look forward to cooperating with you.
Link Fitting
China Link Fitting, Standard Clevis, Shackle Clevis, Lv Type Yoke Plate
Shandong Vantage International Trade Co., Ltd. , https://www.steelplate.be