R100xr70X180degreex55mm Y35 Arc Ferrite Magnets for Motor

 R100xr70X180degreex55mm Y35 Arc Ferrite Magnets for Motor
Permanent ferrite magnet is made of SrO or BaO and Fe₂O₃ by ceramic processing technology.
Anisotropic sintered ferrite magnets have higher magnetic properties compare with isotropic ferrite magnet.
However, this type of magnets can only be magnetized along the preferred direction;the sintered Ferrite has
an excellent resistance to demagnetization. 
 
The Anisotropic Ferrite Ring Magnets are the magnets with multipoles in ring shape. They have
become the key component of stepping motors which are widely used in computer peripheral and
consumer electronics, such as washing machine,different types of pumps,  printer and digital -camera,etc.

 

A Product details

B. Dimension specification 

C. Product Show


D. Specification
 
INTERNATIONAL STANDARD  
E. Magnetization Direction    


F. Features
1) High working temperature
2) Good corrosion resistance
3) shapes: Segments, arc,
4) cheap, good magnet performance
Products: Block ferrite magnets, hard ferrite magnets, Ceramic Magnet
1. Material: SrO, BaO, Fe2O3.
2. Grade: Y10T, Y20, Y25, Y30, Y30BH, Y35, C5, C8, C11
3. Size: At your request.
4. Shapes: Arc, Tile, Block, Bar, Ring, Cube, etc.
5. Certificates: , SGS, ISO9001: 2000, ISO/TS16949: 2002, Sony Green Partner, Factory Audit, RoHS.
6. Application: Widely used in ammeter, audio, phone, TV, dynamo, Motors, Meters, Speakers, Sensors, Medical Machine products, Magnetic Sport products, etc

G. Raw Material&Production Process
Raw materials mixing→Smelting →Powder Production→Molding→Sintering→Magnetic property testing→Fine machinery processing→Surface Coating→Finished Inspection→Magnetization and packing

H. Application
1) Automobile motor: Equivalent to TDK FB5, FB6, FB7, FB9
Mainly used in Starter motor, Fuel pump motor, Wiper motor, Window regulator motor, Blower motor, Condensation motor, Evaporation motor, Automatic antenna motor, Central locking motor, Seat motor
2) Household appliance motor-Inverter washing machine motor
Frequency conversion air conditioning motor, frequency conversion washing machine motor, frequency conversion compressor motor, soybean milk machine motor
3) Small kitchen electrical appliances motor
Widely used in Juicer motor, the soybean milk machine motor, vacuum cleaner motor and air purifier, etc and share 90% of the market share of juicer motor and soybean milk machine motor.
4) Refrigerator compressor motor
The performance is equivalent to TDK FB6, FB9 Series
5) Dc permanent magnet motor
Widely used in Special motor, running mechanical machine motor, motorcycle motor, water pump, etc
6) Other motors 
Power tool motor, Fitness equipment motor, Digital power generator motors. 


I.Package
a: the weight is under 40Kg,we will choose FedEx,DHL or UPS with shielding box for you;
b: the weight is over 100Kg,we will choose shipping for you;
c: the weight is between 40Kg-100Kg per you request;




J. Payment & Delivery


FAQ
1. Q: What information do I need to supply when I have an inquiry?
A: If you have any inquiry, please kindly advise the following items:
Dimensions, sizes, shape and drawing with tolerances.
Material grade or magnetic properties.
Magnetic direction, quantity. Surface coating (if necessary). 
 
2:Q: How about the quality of the magnets?
A:We can offer the certification of ISO14001,OHSAS18001.Our factory participate in the sub-project of the nations's 863 research project High performance sintered NdFeB magnets's production and application.
 
3. Q: What about the sample time and charge?
  A: (1) 7-10 days if you want to customize your logo, charge according to your design
       (2)  3-7 days for our existing samples for reference 
 
4.  Q: What about the delivery time of our products?
A: 10-15days.
Fast Delivery  when you choose the item and decide your design, we can produce it as fast 
as possible, and deliver it as quick and convenient as possible.
 
5. Q: Could you provide me the shortest lead time?
A: We have materials in our stock,if you really need, you can tell us and we will try our best to 
satisfy you.
 
6. Q: What is your MOQ?
A: 1-10-100-500-1000-5000-10000-200000 pcs etc. depend different size ,item, design and process.
 MIN and SMALL quantity accept accordingly.
 
7.  Q: How to pay you?
A: T/T in advance(telegraphic transfer-bank order), for small order, or samples order, or shipment by air.
Western Union cash - for small order or samples order.
Other payment: L/C,D/A,D/P,MoneyGra,Paypal or Escrow.
Different areas may exist some differences.
 
8.  Q: Could I pay a visit to your factory?
A: Yes, of course, if you need, we will help you visit our cooperative factory, everything will be well arranged.
 
9. Q: What about OEM and ODM?
 A: OEM and ODM Accept. We have our best designers, we can produce any design you wanted to meet your needs.
 
10. Q: If I have more questions, where can I get the answer?
A: Any issue, please feel free to contact us any time.
 
                 Mobile
                   Tel:   0086  532-85196797
                 Fax:   0086
 
 

Waterproofing is a system project, only one high-performance material is not sure to solve the waterproofing problem. According to the status and requirement of the different underground project( such as basement, side wall, underground etc.), our company R&D NDF Waterproofing System for these waterproofing projects.

NDF Waterproofing System adopted the reaction adhesion and creep techniques, to R&D the most rigorous and non leakage of waterproofing system.

The reaction adhesion technology is one of the world's most advanced water technology that adequately addressed composite problem of waterproof layer and base course, combined form a waterproof body, so the water channeling can`t be formed in a waterproof layer and the base course layer after local damage, to reduce leakage, improve ease of maintenance.

In the further development of this technology, our company using our own modifiers, so we produced the reaction adhesion layer reaction can take place with the base course better form cross-linked bond, and the subject combining full penetration, and the reaction adhesion layer having a creep, when there is sharp objects damage the waterproofing layer, the reaction adhesion layer will automatically repair, no leakage.

NDF reaction adhesion Waterproofing Membrane is the most advanced waterproofing product that developed by our company in the further development of the reaction adhesion technology. This product is high adaptability, the product has a very excellent performance in terms of tension, elongation, water resistance, the associativity of base course and subject. After applying, it will form a permanent water channeling has self healing powers waterproofing system, it is a good solution for underground engineering waterproof infiltration problem.

There are three types of reaction adhesion waterproofing membrane:

1.NDF EVA reaction adhesion waterproofing membrane

NDF EVA reaction adhesion waterproofing membrane is type of high polymer Self Adhesive Waterproofing Membrane that is using EVA membrane as main waterproof layer, the both sides are daubed rubber bitumen self adhesive material with a creep, the surface is covered by silicon release film.

2.NDF High Polymer Self Adhesive Membrane/Cross-laminated series waterproofing membrane

Our company use [Skin Type" waterproof thinking, on the basis of original self adhesive membrane, targeted at the special waterproofing requirement of the basement baseplate and basement side wall etc.position to developed the pre-install reaction adhesion high polymer self adhesive waterproofing membrane---High polymer self adhesive membrane/Cross-laminated series waterproofing membrane.

High polymer self adhesive membrane/Cross-laminated series waterproofing membrane is composed of high polymer sheet, self adhesive bituminous rubber and release film. This product set advance of high polymer waterproofing membrane with self adhesive waterproofing membrane in one, there are good puncture resistance, weatherability, high and low temperature resistance and self healing etc. And, using pre-install reaction adhesion installation, it is combined with concrete, so that the membrane can stick with concrete, no water channeling.

Due to membrane is strong anti-stick on the baseplate concrete, the structure defect have largely been overshadowed by this [flexible skin" layer, and the baseplate concrete is substantially blocked in breakage of the [skin". As can be seen, imperfect waterproofing membrane and equally imperfect structure forming a near-perfect defense system

3.NDF PVC,TPO reaction adhesion waterproofing membrane

NDF PVC,TPO reaction adhesion waterproofing membrane is type of high polymer self adhesive waterproofing membrane that is using PVC or TPO Membrane as main waterproof layer, the both sides are daubed rubber bitumen self adhesive material with a creep, the surface is covered by silicon release film.

When NDF PVC,TPO reaction adhesion waterproofing membrane stick with concrete structure layer, as the skin grafts for the body, to form a protective layer of closed tight, high ductility, thin and functionalized.

4. EPDM Membrane



In addition to the oils and the polymers used to make an EPDM membrane, another ingredient is added to the mix to enhance UV resistance. In the case of a black membrane, carbon black is added, which converts UV rays into heat. With white membrane, in lieu of carbon black, titanium dioxide is typically used to reflect UV rays and prevent it from attacking the polymer.

High Polymer Composite Waterproofing Membrane

Composite Membrane,High Composite Waterproofing Membrane,Composite Waterproofing Membrane,EPDM Membrane

Weifang Choice-Link Trading Co., Ltd , http://www.clwaterproof.com