Teach you to correctly identify the advantages and disadvantages of the floor

With the changes in the international economic environment, domestic timber raw material prices have soared, production costs have continued to rise, and the flooring industry is facing unprecedented cost pressures. In order to reduce costs, some enterprises shoddy and inferior, such as the production of two-color boards, transfer boards, veneers, thin back sheets and short-lived boards to counter the consumers. These plates are called “five ghosts” in the industry. How can consumers avoid this “five ghosts” when buying? How to identify the surface and internal gaps of “five ghosts”? The road comes.

Uncover the wooden floor, get tired of buying "five ghosts" wooden floor

First, reveal the poor quality of wooden floor greasy swatches

The intersection of the raw wood sapwood and the core material is a solid wood substrate, and the surface of the floor is treated by using color fineness or special coloring to eliminate the color difference between the sapwood and the core material, so as to serve as a high-quality solid wood floor sales to deceive consumers. Since the air dry density, water content, and wood hardness of the sapwood and the core material are different, it is easy to cause a series of quality problems such as arching, deformation, and cracking of the floor.

Identification method: After sanding the floor surface or sawing the floor, the end surface will show a serious color difference.

Second, the secret wood floor greasy adapter plate is not environmentally friendly

It is made up of some tailings, lower wire boards and solid wood floor boards of different lengths by finger jointing process, and acts as a pure solid wood floor to sell consumers. Such a floor is spliced ​​by a large amount of adhesive glue, and the formaldehyde content is high and environmentally friendly, and deformation and cracking are easily caused due to uneven stress in the floor.

Identification method: longitudinal sawing or sanding visible finger joints.

Third, the secret wood floor greasy stickers panel shoddy

On the inferior solid wood substrate, a solid wood veneer of 0.05mm-2mm thickness is attached to serve as a pure solid wood floor for sale to deceive consumers. Such flooring is unstable due to the selection of inferior substrates, and the use of adhesive glue to press the veneer and the inferior wood together, it is easy to cause the veneer to peel off from the substrate, and there is a certain formaldehyde content is not environmentally friendly.

Identification method: It can be distinguished by observing the surface and bottom surface of the floor. The wood grain on the surface of the solid wood floor and the bottom surface are basically the same, and the veneer is completely different.

Fourth, reveal the wood floor, the greasy transfer board, the wood grain is not natural

The use of wood processing with defects such as insect eyes, spots, cracks, etc., to serve as a solid wood floor for sale to deceive consumers. The transfer board is made of inferior grade B wood as the substrate. The quality of the floor is unstable, the wood grain is unnatural, similar to the laminate flooring. At the same time, the paint surface is easy to fall off and crack due to the lack of paint coating process.

Identification method: It can be distinguished by surface wood grain. The wood grain of solid wood floor is natural, the wood grain of the transfer board is the same, there is basically no color difference, and the wood grain on the back and front is completely different.

Five, revealing the wood floor, the greasy short-lived board technology is not up to standard

Wood flooring is a modern industrial product with high production process and certain technical content. Due to their own conditions, some enterprises fail to meet national standards in terms of paint adhesion and paint surface hardness. In particular, moisture content control is not strict, resulting in deformation and paint in a short period of time after floor covering. The surface is peeled off and the surface is not scratch-resistant.

Identification method: The results can be obtained through the evaluation of the on-site wooden floor.

Consumers can avoid the "five ghosts" board intrusion by simply remembering three points when buying wooden floors:

First, we should use large brand flooring as much as possible, and the production management of big brands is relatively standardized.

Second, don't be tempted to be cheap.

As the saying goes: "One point for one price." When the price of a flooring product differs greatly from the market price, consumers must maintain rational consumption.

Third, we must carefully observe the characteristics of the product, compare the texture or saw the floor to see the intrinsic quality.

Brand flooring has strong operational strength, good after-sales service, professional installation team, and reliable quality products. It is the so-called big tree, the state and social supervision is relatively strong, generally will not be fake, and will maintain its good reputation. The five bad floors (weiwei board, short life board, crisp core board, Li ghost board, workshop board) now occupy 30% market share, which generally follows the trend and can only imitate the production, although it claims that the quality of the brand floor is not Different, but in fact, these inferior quality brand flooring does not have the slightest quality assurance, let alone after-sales service, they usually hit a shot for a place, or change the name and then sell, so that consumers are at a loss, become the culprit influencing health.  

Precast Concrete Magnet is configured with a big neodymium Block Magnet in to a steel house.the neodymium block magnet is very big of size which is very large.Magnet For Precast Concrete, is a magnetic tool to hold concrete formwork. There are two hex bolt and a round handle button on the top of the precast concrete magnet, the hex bolt is for fixed with adapter and handle button is for push to use.

How to use precast magnet box? People who use this magnet need to find some shuttering adapter to suit the precast magnet box onto the concrete framework, this framework could be made of plywood,wood, iron steel, aluminum... Then push the round handle button on the top, the block magnet in steel box will sink and contact and catch with iron steel part. After setting the magnet to the formwork,The concrete will be formed trimly just as the precast framework likes.

 If someone want to remove the concrete magnet, he need to find a crowbar and pry up the round handle button and the block magnet will return to its position and not catch the iron steel.

Using the Concrete Formwork Magnet is very convenient, construction workers could build a concrete  formwork on a ground ,and fit two hex bolt with the adapter onto the  the concrete formwork. There is another means of using the concrete formwork magnet,workers could hold the concrete formwork on a hydraulic platform,build and stock the concrete walls,and using forklift and crane to carry the walls while using them.

What are the advantages of using precast concrete magnet in modern architecture construction? By using the concrete magnet, the concrete could form very trimly of sizes for building constructions. By using the concrete magnet, the construction process could be much quicker as workers could stock concrete walls and use these concrete walls to build architecture. The repute of the construction company will be much better and customer will happy to pay the money for the timely construction works. By using the magnet for precast concrete, there will be less concrete works in dangerous high situations, worker could finish their work more safely and construction could save more insurance cost and give higher salary to the workers.

By using concrete formwork magnet,the workers could save more time while build constructions, after using concrete formwork magnet, there will be less risk or danger during the constructing process. In a word, the concrete formwork magnet could enhance the speed of build while inform more security,the workers could make more money from the construction and businessman could earn more money from their business.

The concrete formwork magnet is strong magnetism,please keep the electrical product and card away from it,also, while using the concrete formwork magnet do not put your hand or feet or any part of body under the magnet,it will cause injure.

Concrete MagnetShuttering MagnetPermanent MagnetMagnet


Precast Concrete Magnet

Precast Concrete Magnet,Magnet For Precast Concrete,Concrete Formwork Magnet,Concrete Formwork Systems

NINGBO SHINE MAGENETIC TECHNOLOGY CO.,LTD , http://www.shinemagnets.com

This entry was posted in on