Although the parts of the cement block machine are indispensable, there are indeed primary and secondary parts. So how is this primary and secondary determined? Although the parts of the cement block machine are indispensable, there are indeed primary and secondary parts. So how is this primary and secondary determined? Determine the importance of each part of the cement block machine. First, see if this part is related to the important parts of production. If the equipment is less, this part can work normally. Second, it is easy to damage this part. Some parts are important but hardly Will be damaged and therefore not included in important parts. The most important component that combines the above two characteristics is the cement pad machine hydraulic pump.
Everyone should know that the most important step in the production of the block is compression. This requires sufficient power to achieve this step perfectly. Then the pressure pump becomes a key part because all the pressure is from It comes out here to achieve the formation of the spacer. Through the above interpretation, you can know that this part is the core part of the pad machine, so the protection of him must be the most important, but what should we do when he really has problems?
Our factory has a deep understanding of any problems on the pad machine. In fact, after the hydraulic pump has problems, we only need to consider two aspects, we can solve it smoothly. First, the electronic valve of the hydraulic pump appears. Fault, this time may be the electric valve magnetic coil has burned, or the oil inside the oil circuit is larger than the outside, of course, the solution is yes, the user can check the electromagnetic ring, it is necessary to replace the new one after the burnout, This can be solved by washing the oil mixture inside the control valve. This method is also possible. Another option is to check the filter and, if necessary, wash the filter or replace the hydraulic oil.
Because this product has been gradually upgraded and controlled by computer programs, another reason may be the problem of program disorder, or the hydraulic pad device has deviated during the process, if there is no problem before. In the case, if it is broken now, it is necessary to check the switch. At this time, the formed switch must be broken, and then the wrong signal is sent.
For details of the equipment, please consult the pad machine network: http://
Http://news.chinawj.com.cn Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn
10 zones door frame metal detector:
Fireproof, waterproof, shockproof design, dual-zone or single-zone alarm can be set, and 10 sections can be used to subdivide the human body parts.
10 zones door frame metal detector can accurately determine the specific location of metal objects in the human body and be used for inspections in factories, exhibition halls, etc. Suitable for export.
10 Zones Door Frame Metal Detector
Airport Metal Detector,10 Zones Metal Detector,10 Zones Door Frame Detector,10 Zones Door Frame Metal Detector
Shenzhen MCD Electronics Co., Ltd. , https://www.gdmcd.com