In ultrapure water equipment, ion exchange resin is very important, and its performance is directly related to water resistivity, electrical conductivity, and the number of anions and cations in water. Therefore, the maintenance of the ion exchange resin is important.
First, the storage of ion exchange resins in ultrapure water equipment. The ion exchange resin contains a certain amount of water. When stored, it should not be stored in the open air. It should be kept moist during storage and transportation to avoid air drying and dehydration, so that the resin is broken. If the resin is dehydrated during storage, it should be soaked in concentrated brine (10%). Then gradually dilute, not directly into the water, so as to prevent the resin from expanding and breaking, which affects the performance of the resin. At the same time, the storage temperature is kept at 5-40 ° C, to avoid excessive cooling or overheating, affecting the quality. If there is no heat preservation equipment in winter, the resin can be stored in the brine, and the brine concentration can be determined according to the temperature.
Secondly, the cleaning of the ion exchange resin in the ultrapure water equipment. In the production or use of the resin, inorganic impurities such as iron, lead, copper, etc. (mainly rust) may be absorbed. When the resin is exposed to water, acids, alkalis or other solutions (such as alcohol, hydrogen peroxide, etc.) it will dissolve in it. In addition, the reacted resin can be reacted with a corresponding acid or base or a salt solution to restore the ion exchange activity of the resin, wherein the different types of resins use slightly different solutions.
Finally, the ion exchange resin in the ultrapure water equipment is organic, so oil, organic molecules, microorganisms, etc. have a detrimental effect on it, so before the ion exchange resin treats the water, the water is pretreated to remove oil and the like in the water. In general, the acid resin is metal-proof and can be soaked with 4-5% dilute hydrochloric acid; the alkaline resin is protected against organic matter, and can be soaked or rinsed to neutral with a 10% NaC1 + 2-5% NaOH mixed solution, if necessary. 1% aqueous solution of hydrogen peroxide can be used for several minutes. Others can also be treated by acid-base alternate treatment, bleaching treatment, alcohol treatment and various sterilization methods.
In addition, in the process of using ultrapure water equipment or ultrapure water machine, pay attention to detecting the resistivity and conductivity of water. If the conditions are sufficient, it is possible to detect whether the content of ions in water is within the normal range.
Concerned about surprises
Label: Ultrapure water equipment ion exchange resin maintenance
Previous: Ultrasonic generator use precautions Next: Daily maintenance methods for packaging equipment
The Infrared Heater is made from carbon crystal which is a atom status of carbon. This heater is very efficiency, the electric - heat transfer rate is more than 95%. And because of this, the Infrared Panel Heater can save more than a half energy than air conditioner. Also this Panel Heater is much better than the wind-blowing type heater which makes people feel dry.
Dexiang infrared heater is the No.1 famous brand in China. The quality of Dexiang is strongly good, which easily can allow the panels a 5 years warranty and normally a 50 years long working life.
Our heaters are CE, ETL, ISO certified, we welcome all friend to be our dealers based on mutual benefits !
Infrared Heater
Infrared Heater,Far Infrared Heater,Infrared Electric Panel Heater,Infrared Painting Heater
Shandong Dexiang Electrical Technology Co.,Ltd , https://www.infraredroomheater.com