Your family has old furniture that has not been discarded. Some of the wooden furniture that hasn't been damaged. Although they don't seem to have glorious past, we can spend a little time and use our hands and tools to make them. Rejuvenate. So how do wooden furniture renovation ? Wood furniture renovation steps and methods introduced .
Concrete steps and methods for refurbishing wooden furniture
1, unpacking
Observe the structure and open it carefully to maintain the integrity of the entire piece of furniture. First of all, it is necessary to carefully observe the structure of the parts of the furniture and make serial numbers to facilitate subsequent installation, and disassemble the furniture in the reverse order of the original furniture. Maintain the integrity of the furniture and try to avoid damage to the paint film and the formation of new damage. Try to avoid using the planer. Some of the old folk furniture used in the production of special structures and techniques, commonly known as "final households", leading to irreversible disassembly, at this time try not to disassemble, and remain the same.
2, cleaning
Removal of dust and fill can be blown with a high-power blower and cannot be wiped with a damp cloth. Wiping with a damp cloth blindly on the surface of the part itself can cause unpredictable damage. Sometimes there will be adhesives such as cement, asphalt, chemical paint, and other modern wastes on the parts. This should not be removed by chemical agents as much as possible, and should be removed by physical means such as fine knife scraping and grinding.
3, to paint (except for old parts)
It is usually lightly sanded with fine sandpaper, and the harder part is scraped with a knife. When the paint is removed, the original carved part can not be destroyed. For example, the “Yixiang†foot, which is common in the leg of old furniture of the table type, is very fragile after a long period of natural weathering. Once it is worn out, unless the foot is reformed, Otherwise, it will become permanent damage, and no matter how it is repaired, it will not return to God.
4, ingredients
According to the processing requirements and the endurance of each part of the old furniture, the refurbishment of the ingredients is required to be free from cracks, knots, and decay.
5, grinding
The old furniture paint can be polished directly with an angle grinder. The thick tung paint surface needs to be polished after the torch bake paint surface; the thin paint place can be directly transferred to the scraping grinding workshop, and the scraper can be used for processing. You need to polish the parts and put them in place, leaving no dead ends, no paint, oil stains, and the same depth.
Natural wood texture and texture are the most beautiful and beautiful. Grinding removes burrs on the surface of the wood to express the natural "padding" effect. Padding refers to the fact that, after long-term use of high-quality wood, a layer of bright, jade-like light is formed on the surface. The more brighter it is, the trace of this age is called paving.
It is best to wax the surface of old furniture, such as cypress and eucalyptus, after being polished and hot wax. It will take a long time for "padding" to appear. The finish is no worse than hardwood furniture.
6, assembly
The assembly requires the use of special powders, assembled according to the original structure, the ramming structure is tight, and the diagonal of the frame is symmetric. The whole piece of old furniture was powder-free and flat on all four feet.
7, do paint or decoration
To make a lacquer is not simply to paint, but to keep the original lacquer surface as much as possible. Most of the old folk furniture in clear water and wood color can be rubbed with wax. This is a unique feature of ancient folk furniture repair technology. There is also a need to renovate the paint. Under normal circumstances, after the first coat of paint, four to five coats of paint are applied. A total of eight to ten coats of paint, lacquer and repaint are required. The number of repaints can be reduced appropriately. The paint film also needs to be polished, and the best effect is to use the person's hair repeatedly rubbing. The overall requirement for paint finish is to leave no dead ends, leave no oil, and have uniform color.
Inevitably, painting is also carried out in a limited manner. For example, the floral decoration of the painting cabinet is awkward, and the paint shells are husked. Some customers demand the maintenance of their original status. Some customers will ask for repairs. Those repaired in small areas will not lose their original rhyme. ,is allowed. Some old furniture is still painted with a hemp process. Nowadays, very few people will do this process, and you have to ask experts to recover. If you use a chemical paint brush, a look of thief light, this old furniture The value will be greatly reduced.
Renovation of wood furniture
Removal of dust and fill can be blown with a high-power blower and cannot be wiped with a damp cloth. Wiping with a damp cloth blindly on the surface of the part itself can cause unpredictable damage. As far as possible, some adhesives are not removed by chemical agents and should be removed by physical means such as fine knife scraping and grinding.
After deciding not to retain the original paint surface, use a water wash and rinse with a special brush. If the scale is thick, add a little alkaline alkali water.
The stains such as glue, mud, etc. in the enamel area need to be soaked in hot water to be cleaned.
The washed old furniture needs to be overcast for more than a week, otherwise it will be difficult to recover after the water is expanded. The fumigation is then performed as the case may be to remove bugs and eggs.
Seeing the furniture itself and the extent and location of the damage, it really needs ingredients, the need to find the same, the same color, the same pattern of old wood, and to choose the relative light material. Even if the situation is special, you should use a material with a similar wood texture and a lighter color instead. If parts such as legs, armrests, and horns are symmetrical, the other half of them must be copied as they are.
The above is how to do renovation of wooden furniture For the complete content, you can learn more about furniture and you can pay attention to GO Home Information Channel.
related articles
How to Refurbish Chairs How Antique Chair Renovation is Performed
How to lacquer wood furniture refurbished wood furniture renovation What are the matters needing attention
Sound Yang furniture - how to do renovation of solid wood furniture
Moisture Curing Pu Adhesive,Pu Glue For Textile,Waterproof Polyurethane Adhesive,Reactive Polyurethane Glue
XUCHUAN CHEMICAL(SUZHOU) CO., LTD , https://www.xuchuanchem.com