In recent years, with the improvement of the quality of life, people's requirements for home enjoyment have become higher and higher. The heat preservation, waterproof, heat insulation, etc. have become necessary for home decoration. Insulation materials have become a new type and high complexity. Difficulties for public choice, then what are the external wall insulation materials ? The following and Xiao Bian together to see what external wall insulation materials and their respective materials related to it!
What are the external wall insulation materials
1, silicate insulation material
The silicate insulation material is a solid matrix bonded closed pore network structure material. This product is a special non-metallic mineral containing aluminum, magnesium, silicate base material, mixed with a certain amount of auxiliary materials and The filler is added with a certain amount of chemical additives and is made from new technologies and new technologies.
2, ceramic insulation material
The ceramic insulation board is made of pottery tailings, ceramic chips, river silt, adulterated materials, etc. as the main raw material, and adopts advanced production technology and foaming technology and high-temperature roasting of high-porosity closed-cell ceramic materials. The product is suitable for building external wall insulation, fire insulation belt, building thermal insulation bridge treatment and so on.
3, powdered polystyrene particles
EPG Polystyrene Particle Insulation System uses pre-mixed dry-mixed mortar as the main cementitious material, adding appropriate anti-fission fiber and various additives, and adopting polystyrene foam particles as light-weight aggregates, according to proportions, on site It can be evenly stirred, and the inner and outer surfaces of the outer wall can be used homogeneously, the construction is convenient, and the heat preservation effect is good.
4, XPS XPS
This system uses XPS polystyrene extruded board (hereinafter referred to as extruded board) as the exterior wall insulation material of the building. After the building main body and the exterior wall masonry project are completed, XPS special interface agent is applied on the bottom mortar. The napped XPS extruded polystyrene board was bonded to the wall with adhesive mortar as required, and anchored using plastic expansion screws. Then, the polymer cement mortar was wiped on the surface of the extruded board, in which an alkali-resistant coated glass fiber mesh cloth was pressed to reinforce the crack-resistant mortar protective layer, and finally a decorative surface layer of putty and paint.
5, hard foam polyurethane
The use of isocyanate, polyol two-component liquid raw material composition, the use of non-fluorine foaming technology, under a certain state of the thermal reaction occurs, resulting in a closed cell rate of ≥ 95% (or ≥ 92%) of the rigid foam compound - polyurethane foam Body waterproof insulation material (PUR).
6, HD-STP insulation material
HD-STP exterior wall ultra-thin vacuum insulation board insulation system is a new type, high-efficiency thermal insulation material, and it is also the best insulation material for thermal insulation performance. It is based on the principle of vacuum insulation, and achieves efficient thermal insulation by maximizing the degree of vacuum in the plate and filling with core insulation material.
The above information about the external wall insulation materials is briefly introduced here. I hope that the above information will help everyone. If there is anything we do not know where to leave comments on the bottom of the page, we will answer your questions as soon as possible. Thank you for your support of this site. Follow-up articles have been published. Please continue to pay attention.
What are the wall construction insulation materials
Silicon Aluminum Calcium Barium Alloys
Ningxia Xinshuncheng Special Alloy Co., Ltd. , https://www.xinshunchengalloy.com