We all know that different types of pump installation is not the same, generally we buy a domestic pump, there will be a manual, we can refer to the instructions above to install, then you know that the installation of household pumps What are the precautions for use? Installation and usage precautions: 1. When installing the pump, be sure to install it horizontally or vertically as shown in the "Installation Method". The direction of the water flow should be consistent with the direction of the arrow on the pump body, and should be installed at the lowest position from the water level. 2. For ease of use and service, a valve should be installed on the pump inlet line. 3. When the suction level is lower than the impeller pump impeller or the pump shaft (such as suction well water) pump should be installed check valve, the outlet connected to a tee (such as installation diagram) for diversion, The pump should be filled with water on first use and screwed down. 4. The pipe connection should be close, especially the inlet pipe can not leak otherwise it will reduce the pump head or pumping water 5. Pump cavity is not water, do not long time even turn, so as not to damage the seal. 6. Motor coil equipped with safety protector, the pump fails or pumping water can not cause the motor temperature exceeds the specified value, it can automatically open the circuit to be ruled out the fault motor temperature drop, can automatically resume operation. 7. The pump motor is a capacitor motor, pump rotation direction has been adjusted well, if you need to replace the capacitor or re-wiring, according to the direction of the arrow on the pump body wiring. 8. To ensure safe operation, you must use a three-core safety socket with a grounding wire. Home pump installation looks very simple, but if you do not pay attention to the installation and use of precautions, may result in improper operation, indirectly affect our quality of life. Therefore, the installation of household pumps must pay attention to our attention. Further reading: IFAT China Guangzhou exhibition industry leaders building water pump manufacturers ranking article belongs to Internet industry (Xiamen) Co., Ltd. All are welcome to reprint, please indicate the source and author of: Asian pumps Network Editor: lindj (QQ / WeChat:) Starting: http://beng.liuti.cn/ (Service Hotline:)
Steel poles are commonly used to carry several types of electric power lines, distribution lines and lighting system. Distribution lines carry power from local substations to customers. They generally carry voltages from 4.6 to 33kV for distances up to 30 miles, and include transformers to step the voltage down from the primary voltage to the lower secondary voltage used by the customer. A service drop carries this lower voltage to the customer's premises.
Steel Pole
Steel Pole,Steel Street Light Poles,Galvanized Steel Pole,Steel Pole Tower
Yixing Steel Pole International Trading Co., Ltd , https://www.yx-steelpole.com