The autumn wind blows up and it is dry and dry. It is a little dry for us in life. Similarly, solid wood doors are also facing the troubles of autumn dryness. At this time, in the summer and autumn alternation season, the moisture content and body growth coefficient of the wood have changed greatly, which leads to the easy cracking of the wooden door. So is there any remedy?
Insiders introduced that the general solid wood door is inevitably bumpy in the process of transportation and use, coupled with the constant change of water content, especially into the autumn, the facade often has some cracks. Prompt repair of cracked areas can prevent or delay the occurrence and development of these destructive phenomena, and extend the service life of solid wood doors. In daily life, you can quickly remedy the problem of solid wood door cracking through the following six steps.
Step 1: Prepare some used newspapers and cut them into scraps with scissors.
Step 2: Add an appropriate amount of alum to the paper dust and mix well.
Step 3: Pour the mixture of paper dust and alum into a previously prepared container, add a small amount of water, and stir again.
Step 4: Place the container on top of the simmer and cook into a paste. Stir constantly during cooking.
Step 5: Fill the cooked paste mixture into the crack of the solid wood door and let it dry naturally.
Step 6: Use a paint pen or a special wooden door repair pen to paint the fill area to match the color of the entire wooden door.
The method described above is very simple and convenient, and the materials are very common. A friend in need can follow the above steps to repair the cracked solid wood door step by step!
In addition, the weather is getting colder, and the solid wood door pays attention to the following problems to reduce the chance of cracking.
1, away from heat sources
Solid wood doors should also be kept away from heat sources. The solid wood door of the lacquered surface should be protected from direct sunlight, because the strong ultraviolet ray will easily fade the lacquer surface and affect the appearance.
2, commonly used oil wax glazing
The daily cleaning of solid wood doors is also very particular. When wiping, use soft cotton cloth. The cotton cloth can be slightly damp, but it can't be wet. It can not be squeezed out of water, and should be wiped along the texture of the wood to avoid alcohol and other chemicals. Wipe with solvent or detergent to avoid corrosion of the wooden door paint, causing cracks in the paint surface. In order to avoid the use of a period of time, the wooden door will appear faint, faded and other phenomena, you can regularly wax the wooden door and other corresponding treatment.
Concerned about surprises
Label: How to quickly remedy the cracking of solid wood doors
Previous: Door and window hardware accessories: types and purchase of curtain rods Next: Eight coups to protect water-based wood lacquer furniture
Aluminum High Frequency Welding Pipe
Flat Oval Aluminum Tube,Flexible Aluminum Tubing,Seamless Aluminum Tubing,High Frequency Welded Pipe
Trumony Aluminum Limited , https://www.trumonyalu.com