Bathroom Faucet Mixer Basin Faucet    Â
Â
Technical Databse
| Material  | Brass body + zinc lever |
| Finish |
Chrome plated Antique Bronze, Brushed Nicked, Gold etc. available |
| Handle | Single levers |
| Cartridge |
- 35/40mm ceramic cartridge - 500,000 life cycles - Sedal, Keros, SCC, Kone, Hain-Yo, KCG etc. available |
| Water Pressure Testing | 1.3 Mpa |
| Configuration | 1 hole or 2 holes installation |
| Fittings | Brass or Stainless Steel Fittings |
| Warranty | 5 years |
| Certification | ISO9001, CE and ACS approved |
| OEM&ODM Service | Provided |
Â
Â
Â
Â
QA/QC Introduction:
We were established in 1989 as a developer and manufacturer of faucets and bathroom accessories. Over decades, our main products series have been expanded to basin faucet, bathtub faucet, kitchen faucet, shower faucet and stainless steel hose, totally for almost 40 series. We persist in our mission statement of "To Provide the Highest Quality Products with the Lowest Total Cost that Meet or Exceed Our Customers' Requirements in a Timely Manner". The sequential QA and QC procedures are as follows:Â
1) Material inspection
2) Chemical examination lab
A system to test and control compositions of original materials:Â
1) A test and validation program was developed whereby all of our products are sampled and inspected. The results are submitted for comparison with test results.
2) Establish a procedure to check products at all stages of the manufacturing process from raw materials, in-process materials and validated or tested materials to finished goods. Besides, we have also developed a procedure which identifies the inspection and test status of all items at all stages of the manufacturing processÂ
3) There is a system that tracks in-process defects and other non-conformances. These records are used to analyze root causes and solve the problemsÂ
4) We have established a quality manual, which is maintained as means to ensure that products conform to specified requirements
5) 100% inspection in assembly lines: all controls, inspections, equipment, fixtures, total production resources and skills are inspected to consistently achieve the required quality levels
We Provide You With Sincerely Service, if you interest, please contact us NOW!!!
Tel:86-577-85227866
Fax:86-577- 85229208
Standard Brick Texture PU Sandwich Panels
16mm pu faux wood decorative low cost wall panel
Rich selection of textures and colors meet different decoration requirements, giving the city and the buildings a new look.
The PU foam is the most advanced and eco-friendly insulation material in the world. With the help of the back aluminum foil, the thermal preservation effect achieves the best.
The unique structure prevents the heat loss in winter. Meanwhile it reduces the heat of the summer sunshine.
Aceta paintcoat and flurocarbon paint of weather resistance performance are applied on surface of wall panel. It is reserved with superior self-cleaning, weather resistance, corrosion resistance and acid& alkali resistance performance.
Light weight with 3.7Kgs/m2 makes the installation easy.
The installation process is clean and tidy without any noise and dust, construction waste.
Different selections of accessories meet different effects.
High quality and stable performance: Manufactured in CNC automation production line, the product pass rate can reach 99.9% with stable chemical structure and physical structure.
Composite Wall Panels,Pu Composite Panels,Insulated Wall Siding Panels,Standard Brick Texture Pu Sandwich Panels
Jinan Zhengtang Insulation Decoration Material Co.Ltd , https://www.ztwallsiding.com