It is reported that the automatic frame (Autoframe) produced by Knotex Machinery Manufacturing Co., Hamburg, Germany, can fully automate the knotting process.
The microprocessor controller of the automatic warp machine is used for data exchange between the warp machine and the rack. Data is transmitted and converted through a dedicated channel. The sensor mounted on the warping machine continuously measures the tension of the upper and lower layers through the skein and sends the obtained data to the microprocessor; then compares the actual measured value with the set value and immediately sends the offset value to the machine. frame. The frame is adjusted to the set value by the servo motor.
The good cooperation of the various components of the equipment allows the machine to achieve reliable knotting, and the knotting process is completely automatic, and the good knots also reduce the needs of personnel .
Here are all BOSCH power tools and the designated carbon brushes,motor brushes, electric brushes, motor brushes, electric motor brushes or simply brushes.
For each power tool, there are usually two carbon brushes to choose from: With automatic stop and without automatic stop. Carbon brushes with automatic stop have a spring through the length of the carbon brush. When the carbon brush wears out, the spring gets released, the current to the carbon brush gets interrupted and your power tools switches off at once. The advantage: No additional wear and tear to your power tool. Carbon brushes without automatic stop do not stop functioning at once, but performance of your power tool will detoriate rapidly. Although handy as a warning sign, this usually isn't very beneficial to your power tool.
If you can't find your BOSCH power tool here, please contact us: Most likely we can help!
Bosch Carbon Brush,Bosch Grinder Carbon Brush,Bosch Carbon Brush For Power Tools
Haimen Hailing Carbon Industry Co., Ltd. , http://www.carbonbrush-hl.com