>>>Links: 10 kinds of paint conditions for the right medicine
1, paint must use high-quality paint. During construction, clean the site and minimize human activities and dust processes.
2, check the cleaning of the grass-roots level, can be used to gently polish the surface burr 400 sandpaper, clean with a clean towel, check the surface of the panel for any stains, damage can be used.
3, all panels and lines should be done after the transparent putty and primer again. After the substrate is cleaned, a transparent putty can be applied. According to the type of the panel, brushing or direct squeegeeing can be applied. The transparent putty can be applied twice. After being coated for 4 hours, it can be ground and polished. The putty should be thin and uniform.
4, putty polished, transparent primer, transparent primer and special clear transparent bottom and curing agent, thinner ratio of 1:0.3:0.8 to 1. The transparent primer should be brushed or sprayed with 200 filters before use and brushed twice. After coating for 4 hours, dry and polish with 400-grit paper.
5, before painting, should be finished product protection, the door hinges, locks, door edges and other vulnerable parts of the paper tape carefully paste. It is forbidden to stack other items on the paint veneer. The floorboards of the finished product are protected by paint articles to prevent the paint from dripping onto the finished floor.
6. During the construction, the proportion of the paint, curing agent and diluent shall be detailed with the paint construction instructions. After the paint is mixed, it is filtered with a filter of 200 or more and used after standing for 15 minutes. Brushing should be thin and uniform, no flow, pinholes, and missing brush parts.
7, to fill the nail eye, transferred at least 4 color putty after the model color test. Paint over the top 1 times. Use after determining the effect is good. (50
Wall construction paint
Film Faced Plywood,Bedroom Furniture,Cabinet Door Co., Ltd. , http://www.nsplywoods.com