| Home>Bearing knowledge>Precautions for using Red Star Crusher |
Precautions for using the Red Star Crusher
Source: China Bearing Network Time: 2018-04-01
| /*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089'; |
One. Preparation before starting 1; Care should be taken to see if there is an outstanding smooth bearing; the connection in the bearing housing; and whether there is a satisfactory grease;
2; Care should be taken to see that all fastenings are completely fixed.
3; the transmission belt is good; it is found that there is a marked replacement in time; there is a belt or pulley grease; a clean rag wipes his request and;
4; The protection equipment is good; if it is found that the protection of the equipment is not safe; should be revoked immediately.
5; check whether the ore crushing chamber or other debris; such as ore; or other debris; should be revoked.
two. The beginning of the crusher; after viewing; prove that the mechanical transmission is normal; before launching;
2; This machine is only required to be launched under load conditions.
3; After launching; if abnormal conditions are found; it should stop operation; it is necessary to identify and eliminate abnormal conditions; then start from scratch; started the crusher.
three. Protection and application 1; the normal operation of the crusher; then start pouring the material.
2; breaking the data should be consistently involved in the crushing cavity; and side effects; should avoid feeding; to avoid sudden changes in load or unilaterally added.
3; Under normal conditions; the bearing temperature rise should not exceed 35 ° C; the maximum temperature rise does not exceed 70 ° C.
4; parking; the information of the primary feeding operation can be broken after the broken cavity should be broken;
5; In use; Ruoyin broken cavity data; blocked by parking; should close the motor; the data must be deleted first; then move from the hair.
four. Smooth 1; often pay attention to the smooth operation of the surface of the conflict; then; to ensure the normal operation of the crusher and extend life.
2; calcium-based smooth grease commonly used in machines; users can also be used to select other conditions depending on the orientation of the machine; other types of temperature and grease; but it is necessary to be protected by smooth and outstanding bearings.
3; participate in the total amount of bearing 50-70%; oil; need to replace once; 3 months. when replacing the oil; request for sanitary gasoline and fire oil; and carefully arrange the steel ball slide 4; brackets; Before the start, the pad is in contact with the grease crusher.
Recommend to friends comments close window
| Bearing related knowledge |
| Sliding bearing rejection specification Ntn bearing disassembly and assembly protection method electric fan bearing wear repair auto parts life test: bearing test details "SKF imported bearing cleanliness" problem |
This article links to http://
Please indicate the bearing network http://
Previous:Pump E-type impeller external aerator according to the whole machine classification Next: Polyethylene. PE) Plastics clarification
Stainless steel material,High Quality Stainless steel material,Stainless steel material Details, CN
Yangjiang YJCB Trade Co., Ltd , https://www.cbprokitchen.com