When the renovation of housing wall is to be done, there is something we need to be granted the wall, so we need to know in the decoration of knowledge in these areas, and some of the steps and precautions that we need to master, then batches Wall What are the steps ? What are the steps of the wall that need our attention? If you want to know, let's take a look at the Xiaobian of the decoration home network.
First, what are the steps of the batch wall?
1, wall interface agent
The interface agent has strong adhesion, aging resistance and excellent water resistance. It can improve the bonding strength of the plastering mortar to the base layer, and can effectively avoid the problems such as empty drums in the plaster layer, wall ash falling off and cracking due to shrinkage. Therefore, it is necessary to apply the interface agent completely and evenly on the cement wall.
2, the wall leveling
Wall painting is also required before painting. The unevenness difference is less than 0.5 cm. Then use putty to apply. Apply a smooth finish to the wall to maintain integrity.
3, wall patch
Generally, non-load-bearing walls such as light-weight walls and thermal insulation walls need to be applied, which can improve the hardness of the putty. If you choose a mesh cloth, the crack prevention effect is better.
4, the wall is polished
Wall polishing not only relates to the final flatness of the wall, but also an important means to solve some small flaws in the wall decoration, which makes the wall surface flatter and the surface more detailed and uniform.
5, brush primer
The primer is used to prevent the pantothenic acid and alkali from the base layer, and it has the effect of matching with the top coat. The latex paint with the primer is smooth and granule-free, the color is symmetrical, and the hand feels full.
6, brush finish
Topcoat, also known as finish paint, is a layer of paint applied after multi-layer coating. It should have good resistance to external conditions, must have the necessary hue and decoration, and have a protective effect on the undercoat.
Second, the wall considerations
1. First clean the entire surface of the floating ash and dust, and then partially put the putty, smooth, the board is used for gypsum expansion treatment, after the dry, put on the bandage, wait for the first, full of putty, etc. After drying, scrape the putty for the second time, wait for the putty to dry out, check, make up the putty, and again put the putty again. This time is the key once, be sure to level, not too thick, wait for the putty to dry and smooth, finish 1 coat, wait for the dry, add the putty, polish, finish the coating twice, and after drying, paint the third coat. The wall surface that comes out of this way can be of good quality, without cracking or peeling.
2. Pay attention to the base layer of the original wall surface. If it is relatively soft, it needs to be re-leveled after being removed. After removing the original wall skin, use the interface agent to roll the coating. The purpose is to “seal the base layer and increase the adhesionâ€; Surface verticality and horizontal flatness, determine the leveling thickness; leveling the foundation leveling needs to use the better quality plastering plaster. When the leveling is relatively thick, the mesh fiber cloth should be hung and leveled to ensure that the wall surface will not be empty and fall off. Use the finished putty surface to level, the thickness of the leveling should not be too thick.
It is very important to decorate the part of the wall in the house. The wall is also one of them, so we also need to know the wall, then what are the steps and precautions? I think everyone will read the above introduction. Well, if you still want to know more about decoration, please continue to pay attention to the decoration home Internet cafe.
Maijin outdoor WPC has the same processing performance as the log. It can be nailed, drilled, cut and bonded. It is connected and fixed with nails or bolts. The surface is smooth and delicate without sanding and painting. The paint has good adhesion and can be painted according to personal preference. The product has better physical properties than log, better stability than traditional wood, no crack, warpage, no wood scar, twill, adding colorant, film or composite surface can be made into colorful products, without time-consuming maintenance.
Maijin decking is divided into single extrusion board, co-extrusion board and soft clad board; the inner core is divided into round hole, square hole and solid; the grain is divided into horizontal grain and wood grain.
Wpc Decking,Wpc Deco Decking,Wpc Deco Flooring,Wear Resisting Wpc Decking
Dalian Huimingmaijin New Materials Co.,Ltd , https://www.maijinfloor.com