Some netizens asked that there was no contact with the decoration contract before. This time, the decoration company of the other party had come up with a sub-contract. But how do I know that some of the necessary provisions are listed? What are the terms of the decoration contract?
1. The first article of the contract is the general situation of the project. The first is the location of the project and must be filled out in detail. The second is the contracting of the project in three ways, that is, the contracting of Party B and the packing of all the materials; the contracting of Party B, part of the materials, and part of the materials provided by Party A. Party B's contracted work and Party A's package of all materials are completely determined by Party A. Followed by the project deadline, and finally the total cost of the contract clearly written.
2. Article 2 of the contract states that if this project implements project supervision, Party A and the supervision company shall sign the “Engineering Supervision Contract†separately, and notify Party B of the name, unit, contact information and supervision engineer’s duties of the supervision engineer.
3. The third article of the contract is construction drawings. The contract stipulates two methods. The first is that Party A design and provide construction drawings.
4. Article 4 of the contract stipulates the work of Party A, that is, your construction site must have the conditions for construction.
5. Article 5 stipulates the work that Party B should do to avoid brute decoration.
6. The sixth item is the engineering change.
7. Article 7 of the contract is material supply. First, according to the contract, the materials provided by Party A, Party A shall notify Party B before the materials arrive at the construction site, and the two parties shall jointly accept and handle the handover procedures. Second, the materials provided by Party B according to the contract, Party B shall submit the materials to the construction site. Before the notice to Party A, the two parties jointly accepted.
8. Article VIII of the contract rigidly stipulates the solution to the delay of the construction period.
9. Article 9 of the contract is a "Beijing Municipal Household Decoration Engineering Quality Acceptance Regulations" which is stipulated by both parties for the construction quality of the project to be carried out on March 1, 2000.
10. The tenth clause of the contract is that the two parties agreed to carry out inspection and acceptance of the project quality in several stages during the construction process. Qualified items are: the first stage is the acceptance of the main material when it enters the site; the second stage is the acceptance after the concealment project is completed. The third stage is the completion of the project, acceptance of qualified users signed, settlement is completed, enter the warranty to the site acceptance. Party B shall notify Party A to participate in the inspection and acceptance two days in advance. After the acceptance of the phase, Party B shall fill out the project acceptance checklist.
11. Article 11 of the contract is a payment method for several types of construction projects. One is to pay 60% before the start of construction, and then after the construction progress is over half, the remaining 40% will be paid to the home improvement trading market contract certification office to which the company belongs. , The market is then paid to the decoration company based on the progress and quality of the project. The other way is to pay in three separate payments. You can pay 60% for the first three days before the start of the project, 35% for the progress of the project, and 5% for the acceptance.
12. Article 12 of the contract is a liability for breach of contract, which stipulates that any one of the parties to the contract shall be liable for the financial penalty due to failure to perform the contract or violation of national laws, regulations and relevant policy provisions. Responsibility and compensation for economic losses caused to each other. Be sure to fill in carefully, and if you have a problem, rely on its agreement to compensate you for your losses.
13. Article 13 of the contract is a solution to contract disputes. First of all, you can apply to the management department of the market where the decoration company is located to apply for resolution. If you cannot solve the problem, you can go to the district association or the Home Decoration Committee of the Beijing Building Decoration Association to mediate. If it cannot be resolved, it can be sued in the local (district or county) people's court and decided by the court.
14. Article 14 of the contract is a few specific provisions concerning the garbage removal fee, the storage and replacement of keys during construction and acceptance of the project, as well as the daily working hours of Party B during the construction period.
15. Article 15 of the contract is a by-law, which stipulates that the contract must be signed (stamped) by both parties before it can take effect; after the contract is signed, the project may not be subcontracted; if both parties sign the contract directly, this contract is in two copies. Party B and Party B each hold one.
16, other terms. The more detailed the two sides can complete the protection of their interests, the better they can constrain the parties and avoid the occurrence of many disputes and the ease with which disputes can be resolved. In addition, the terms of the agreement in the case of mutual recognition of the market will also be stamped with a seal of approval of the contract, the representative market has agreed to sign the terms of the two sides.
Decoration contract decoration decoration company home decoration decoration design home decoration
Reflective Intermix Glass Beads, used in road marking paint and traffic signs,is important in mantaining visibility of motorist for driving under dim light or bad weather. used in highway ,arrport runway, pavement marking line, zebra crossing in traffice road line, road marking as reflective materials.
Road Marking Beads Reflective are solid, spherical glass beads for use with road marking materials such as Road and Line Marking Paint Water Based, Solvent Based and Thermoplastic.
Solid glass beads for use with road marking compounds, Class A and Class B are high quality glass microspheres resulting from the specialised processing of selected glass culet.
Road Marking Paint Reflective Glass Beads are a major factor in increasing road safety in an economical manner. Thanks to the beads` retro-reflective action at night, a vehicles headlight beam is returned to the drivers eye.
The microspheres not only multiply the visibility of the markings at night, but also increase the markings durability in general. Road Marking Reflective Glass Beads are used as a drop agent and as premix beads for road marking materials.
CHARACTERISTICS:
Increase visibility of road markings at night, High durability.
Intermix Glass Beads
Intermix Glass Beads,Intermix Glass Beads For Road Marking,Road Marking Intermix Glass Beads,Traffic Sign Intermix Glass Beads
YONGQING BAILUYUAN GLASS PRODUCTS CO.,LTD , http://www.blyglassbeads.com