Tips: Identification and prevention of hazards in plastic bottles


1. Identifying plastic products Marking the plastic products produced by most regular manufacturers, the letters written in the raw materials or raw materials citations will be indicated on the products or on the product packaging.
Whether it is a simple plastic container product or a packaging container for food, it is generally printed with a recycling mark on the container (see figure), and the middle of the triangle is marked with a number from 1 to 7, and the initial abbreviation of the raw material is also indicated. .
The triangle winning "1" indicates that the raw material is polyester (PET);
"2" indicates that the raw material is high density polyethylene (HDPE);
"3" indicates that the raw material is polyvinyl chloride (PVC);
"4" is expressed as low density polyethylene (LDPE);
"5" indicates that the raw material is polypropylene (PP);
"6" indicates that the raw material is polystyrene (PS);
"7" indicates that the raw material is a plastic other than the first to sixth types. Among these plastics, the most widely used polycarbonate (PC) in food.
2. Sensory identification of harmful plastic products that smell pungent or unpleasant edible plastic products may have safety issues.
Some kitchen utensils (such as the pot handle) will emit an unpleasant smell when exposed to high temperatures. These substances are also toxic, and excessive inhalation can also endanger human health. There are also some inferior electric plastic kettles that produce an unpleasant odor when heated to boil water. Such plastic pots are not safe for the human body.
3. Proper use of plastic containers Various plastic containers and utensils also have potential safety hazards. Pay special attention to the following points --
(1) Avoid using plastic food and kitchen utensils produced by informal manufacturers.
There are many cheap plastic products on the market that often do not clearly indicate the scope of application. Avoid using such containers to store hot foods, especially liquid foods and foods with high oil content. Because heat and oil promote the dissolution of harmful ingredients and contaminate food.
(2) Use special plastic appliances for microwave ovens produced by regular manufacturers.
Plastic containers for microwave ovens should be translucent, non-colored, and resistant to high temperatures. Microwave ovens can be used to heat foods with a large water content. PP plastic containers can be used. For heating oily dishes and foods, PC containers with higher temperature resistance should be used. If non-liquid foods are heated, it is not advisable to use any plastic containers.
Use a microwave to heat food, preferably a glass container or a porcelain without any internal dye.
(3) Avoid using non-heat-resistant containers for hot food.
Some plastic bottle containers will become soft and deformed when exposed to heat. Do not attempt to use such containers to hold overheated food. Although such plastics are safe at room temperature, they may decompose and release harmful components at high temperatures. It is common for some people to put hot water and hot tea into mineral water bottles or beverage bottles, which has certain health hazards.

Reflective warnings are an integral part of human traffic safety engineering, which plays an irreplaceable role in reducing traffic accidents and night warnings. Daoming reflective warning line products have thousands serous,widely used in high-speed, bridges, telecommunications, mobile, garage, poles and other fields, to meet the different needs of different customers.

The marking is a reflective material that embeds high refractive index glass beads in a highly transparent, highly wear resistant resin, has a two-color effect after special treatment, and has a retroreflective effect on the incident light.

 

Used in reflective and warning color requirements of the road crossed, partition, isolation and other places.

 

Normally we cut in 5.5CM * 5.5CM 3.5CM * 3.5CM with yellow back colour or red white colour.

 

The above products can be customized according to customer size.

Solvent Printing Reflective Sheeting

Solvent Printing Reflective Sheeting,Pvc Solvent Printing Reflective Sheeting,Solvent Printing Pvc Reflective Sheeting,Solvent Printing Grade Reflective Sheeting

Daoming Optics & Chemical Co., Ltd , https://www.reflectives.nl

This entry was posted in on