Australian pine board is widely used in decoration, furniture, construction, packaging and other industries. Its hardness is large, suitable for wardrobes, bookcases will not be deformed (even floor), load-bearing, fireproof and moisture-proof performance is better than traditional large core board, material is very Environmental protection.
The disadvantage of the Australian pine board is that it is not easy to eat ordinary nails. The Ozon board and the Australian pine board have this problem, mainly because the foreign wood processing mostly uses screws instead of large nails. This is for easy disassembly and will not damage the board after disassembly. The value of reuse is high (the traditional large core board is hammered into the hammer, and it is basically scrapped after being removed). Therefore, from this point of view, it cannot be said that the Australian pine board does not eat nails, in fact, it has the nail holding effect on the screws. Very good, but the nails that are hammered into the hammer have the same performance. Therefore, it is recommended to use more screws to install, which is much better than the hammer and nails. Look at the things of IKEA.
In addition, there are many cases of crusting and unevenness of the plate. Small holes and small pits are prone to ash accumulation in the north, so it is recommended that the workers approve the colored ash (for exaggerated plates) before painting. Transparent putty on several occasions (for fine pitted plates).
Overall, this board is also more expensive, but it is environmentally friendly, and it is worthwhile as a furniture material for health. The small disadvantages have obvious advantages over the traditional large core boards, so pay attention to the process when using them.
The Australian pine board has been jointly certified by Australia, Japan and New Zealand and meets the E1 standard. It is accepted and used in many countries and regions, such as Australia, Japan, South Korea, Taiwan, Singapore, Malaysia, Hong Kong, Indonesia, the Philippines, the United Kingdom and Sweden, and many countries in Europe, Asia, the Middle East and the Pacific. The Australian pine board is the best material to replace the multi-layer board. Typical applications include: drawer bottom, furniture floor, wall and ceiling panels, door cladding, audio and TV frames, office partitions, exhibition panels, curved Shapes, counters, tables and bars, fan sheets, floor coverings, seat cushions, wooden lines.
Cream Bowl,Salad Bowl,Ceramic Salad Bowl
Home Decoration,Tablewares And Kitchenwares,Mugs AND Cups Co., Ltd. , http://www.nsdecoration.com