Because industrial casters are installed on the equipment and replace various people's transport labor, they continuously endure various kinds of overweight, impact, vibration, adjustment of rotation and other unfavorable conditions. Therefore, when selecting caster specifications, customers need to fully consider various kinds of tolerance. condition. The following small series introduces the industrial caster performance characteristics and industrial caster troubleshooting methods.
Industrial Caster Performance Features
1. The castor bracket produced by high-pressure punch press is used for stamping and forming once, which is suitable for the short-distance transportation of 200-500kg carrying capacity goods.
2, can be used according to different user environments can use a variety of materials and width of the caster.
3. Generally industrial casters can be used in the environment of factories, workshops, commerce, catering and other industries.
4. Different caster products can be designed according to the user's required environmental carrying capacity.
5, optional industrial ball bearings and industrial roller bearings two.
Industrial caster troubleshooting method
1. Loose casters or stuck wheels will cause “leveling†to be checked and repaired regularly. In particular, check the tightness of the bolts and the amount of lubricant. Replace the broken casters to enhance the rolling performance and rotation flexibility of the equipment.
2. Check whether the bearing of the wheel is damaged. If the part is not damaged, it can be reassembled and used continuously. If you often meet the phenomenon that the wheel is wrapped around the debris, it is recommended that you can assemble the cover to avoid it.
3. After checking the repair wheel, make sure that the bolts and nuts are tightened. Use lock washers or locknuts on all bolts as much as possible. If the bolts are loose, tighten them immediately. If the wheels in the bracket are loose, the wheels will be damaged. Damaged or unable to turn.
4. Severe breakage or loosening of rubber tires may lead to rolling instability, abnormal air leakage load, and floor damage, etc. The timely replacement of damaged tires and bearings can reduce the cost loss caused by stoppages due to caster damage.
5. Regular inspection and maintenance Add lubricant to casters and bearings at regular intervals. Lubricate the places where it is prone to friction until there is a little squeezing out. Such as the wheel core, thrust washers, and roller bearing roller surfaces can reduce friction and rotation. Flexible use is more convenient.
How to choose industrial casters
1. Carrying capacity: It determines the weight of the load, the size of the wheels, and also affects the rotatability of industrial casters. The ball bearings are suitable for heavy load requirements of 180 kg or more.
2, the use of site conditions: choose a large enough round to adapt to the scene of the crack. Also consider the use of road surface size, obstacles and other factors.
3, special environment: Each wheel to adapt to different working environment, choose the best to adapt to the special environment. For example, traditional rubber can not be resistant to acid oils and chemicals. If you want to apply different special circumstances, Keshun high-tech polyurethane rubber wheels, plastic wheels, modified bakelite rubber wheels and steel wheels are a good choice.
4. Rotational flexibility: The greater the rotation of the wheel, the more effort it takes. The ball bearing can carry heavier loads, and the ball bearing can be rotated more flexibly, but the load is lighter.
5, the temperature limit: cold and hot summer may cause trouble to many wheels, casters using Keshun special green grease can make the caster suitable for -40 °C to 165 °C high temperature.
Editor's summary: The industrial caster performance characteristics and industrial caster troubleshooting methods are introduced here, and I hope to be helpful to everyone. If you want to know more related information, you can pay attention to this website information.
Industrial Chemical Curtain Installation Methods Industrial Power Industrial Casters
Drop-in bathtub is designed for hotel and personal bathroom. We have single and double ended styles. Many different shapes and styles are available. Drop-in Tubs bring serenity and relaxation by being amazingly comfortable, and durable enough to withstand everyday use. This classic style will sit flawlessly in any decor scheme, bringing you amazing style to match your contemporary style bathroom.
Drop-in Tubs
Drop In Bathtub,Bath Company,Drop In Soaking Tub,Tubs For Sale
Ningbo Waltmal Sanitary Wares Co., Ltd. ,