Nowadays, more and more people like to use polished tiles to decorate the home floor. But what do you mean by polishing tiles ? If the understanding of the polished bricks is not so deep, today Xiao Bian came to you to introduce what is called polished tiles and polished tiles to buy points.
What is polished brick?
The polished brick is a kind of bright brick that is polished on the surface of the whole brick body and belongs to a whole body brick. For bricks, the surface of the polished tile is much smoother. The polished tiles are hard and wear-resistant and suitable for use in most indoor spaces other than toilets and kitchens, such as for balconies and exterior wall decorations. Based on the application of the infiltration technology, the polished tiles can make various kinds of imitated stone and wood effect.
What are the advantages of polished tiles:
1. No radioactive elements: Natural stone is a mineral substance, which has not been sintered at high temperature, so it contains individual trace radioactive elements. Long-term contact will be harmful to the human body; polished tiles will not cause harm to the human body;
2. Basically controllable no color difference: Natural stone has a large difference in color due to diagenesis time and rock formation depth. The polished tiles have been carefully deployed, and the color of the same batch of products is basically the same with no color difference.
3, high bending strength: natural stone due to the natural formation, the finished time, weathering, etc. are not the same, resulting in a close degree of strength and strength; polished tiles by thousands of tons of hydraulic press, and then sintered above 1200 °C high temperature, high strength;
4, thin brick body, light weight: natural stone due to low strength, so the processing of large thickness, bulky, increasing the load weight of the building on the floor, the formation of potential threats, rising costs, and increased transport, paving and other difficulties;
5, non-slip: It is very important that the floor tile is slippery and safe, especially the family with old man child pays more attention to the anti-slip effect of the tile. The surface of the polished tile is bright and bright, and many consumers think that its anti-skid effect is poor. If water is spilled, it will increase the safety risk, so that they can't avoid it. Instead, they have to choose the "light-contained" matt ceramic tiles. In fact, all the polished tiles are non-slip. If there is dirt on the bricks, the water will be astringent, so as long as the daily cleaning is done, the non-slip effect will not be affected. In anti-slip performance, polished tiles are the same as matt tiles.
What are the disadvantages of polished tiles:
Polished tiles are popular with consumers because of their hard, wear-resistant and suitable for large-scale indoor and outdoor decoration. However, when the polishing bricks are left in the production, the pores are contaminated, which can cause the surface to easily infiltrate the contaminants. Even some of the tea is poured on the polished tiles. Perhaps the industry is aware of this, and later some good-quality polished tiles have been coated with an anti-fouling layer at the factory, but this anti-fouling layer has also caused the tiles to lose the effect of bricks. If you want to continue the whole body, you have to continue to brush the defense layer. In the decoration industry, water wax is applied before construction to prevent sticking. Polishing brick antifouling technology is at the forefront of Europe and the United States, Italy, Spain, and only a few domestic first-line brands have such anti-fouling technology. Therefore, anti-fouling treatment technology has become a compulsory course for polished tile products.
The effect of the polished tile glaze differs from the method of embossing, large particles and other decorative methods. It uses a special special frit mixed with the base material and pressed or applied to the brick surface through a special screen printing, and after burned, it is polished to produce different color particles or patterns, etc. Decorative effect.
Polishing bricks purchase points
View color: Under bright lighting conditions, observe whether the surface color of the brick is bright, the texture is clear, the same color number is the same color, several tiles can be put together, look carefully under the light, no obvious color difference, brick Body surface without pinholes, black spots, scratches and other defects. Pay attention to whether the mirror effect is strong or not, the better the product hardness of Koshihikari, the higher the degree of vitrification, the better the degree of sintering, and the lower the water absorption rate.
Listening : Tap the bricks by hand and carefully discern whether the sound is crisp and pleasing. With metal sound quality, the brick body has high density and good sintering. If the brick body is rough and dull, the sinterability of the brick body is low, and the density is not high. Such as scratching sound hoarse, this tile is a poor quality product, and even brick may have cracks.
Test water : pour a small amount of ink or tea on the brick surface, let stand for two minutes, then rinse with water or wipe with a cloth to see if the residue marks are obvious. If there are only a few residual marks, the brick body has low water absorption and good stain resistance. Physical and chemical properties are good. If there are obvious or serious traces, the vitrification of the brick body is low and the quality is poor.
The amount of rubbing : Hand rubbing bricks feel heavy or not, the same specifications, the same thickness of the brick, the heavier the better, because the heavier brick, the higher the density, the more wear-resistant.
Packaging : The authentic packaging is beautifully printed, the patterns are vivid in color, the text is clear, and the size, color number, and site of the product are indicated.
The above is a brief introduction to what is called Polishing Tiles and Polishing Tiles. We hope to help you. For more information, please visit this website. Stay tuned.
The top ten brands of polished tiles
1. Use Surface Mount System to install electron component. High quality stable and more quality consistency.
2. Pass germany TUV testing, have EMC and LVD certificate.
3. The AC input power voltage is made between 85V to 240V. So it could select AC input voltage automatically. You could work in AC USA 110V or AC europe 220-240V.
4. CEL: Cellulose electrode is special electrode to lay big pipe on oil and chemical industry, natural gas, electric power, civil pipeline of oil, gas, water. They need high ilder voltage (more than 90V). This machine could do
MIG Welders, Miller MIG Welder, Used Welders
YongKang WALMA Tools CO., LTD. , http://www.walmatools.com