On August 18, it was learned from the Department of Industry and Information Technology of Henan Province that as of the end of July, 267 enterprises in 19 provinces in the province had been eliminated from backward production capacity, and 260 production lines that had already been eliminated were all shut down.
According to the requirements, this year, the target of eliminating backward production capacity in Henan Province is: the province should eliminate backward production capacity of 2,598,500 kilowatts, ironmaking capacity of 450,000 tons, steelmaking 300,000 tons, electrolytic aluminum of 113,800 tons, ferroalloy 88,800 tons, 90,000 tons of non-ferrous metals, 350,000 tons of coke, 8.62 million tons of cement, 2.04 million weight boxes of glass and 290,000 tons of refractory materials.
Reinforcing bar,or Deformed Steel Rebar, is a common steel bar that is hot rolled and is used widely in the construction industry, especially for concrete reinforcement. Steel rebar is most commonly used as a tension devise to reinforce concrete and other masonry structures to help hold the concrete in a compressed state. Concrete is a material that is very strong in compression, but virtually without strength in tension.
To compensate for this imbalance in a concrete slab's behavior, reinforcement bar is cast into it to carry the tensile loads. Common steel or concrete reinforcement bar is supplied with heavy ridges to assist in binding the reinforcement to the concrete mechanically - this is commonly referred to as deformed rebar. Deformed Steel Rebar is used to be called Screw thread steel.
Steel Rebar is a steel bar or mesh of steel wires used as a tension device in reinforced concrete and reinforced masonry structures to strengthen and hold the concrete in compression. Concrete is strong under compression, but has weak tensile strength. Rebar significantly increases the tensile strength of the structure. Rebar's surface is often patterned to form a better bond with the concrete.
|
Product Name
|
mild steel bar price /steel rebar /iron rods for construction/concrete
|
|
Standard
|
BS4449-2005,GB1449.2-2007,JIS G3112-2004, ASTM A615-A615M-04a,
Korea StandarsKS D 3504, AustralasianStandard AS/NZS 4671 |
|
Grade
|
BS4449, Gr460B,Gr500B, GB1449.2, HRB335, HRB400, HRB500, HRB400E,HRB500E, ASTM A615, GR40/GR60/GR75, JIS G3112,SD390,SD360 Korea StandarsKS D 3504 SD400 SD500 SD600, AustralasianStandard GR500N
|
|
Size
|
6mm,8mm,10mm, 12mm, 13mm, 14mm, 16mm, 20mm, 22mm, 25mm, 30mm, 32mm, 40mm,50mm, etc..
|
|
Application
|
civil engineering construction,such as housing, bridges,road, etc
|
|
Delivery
|
Normally 3-10 days after receive deposits or L/C at sight.
|
|
Package
|
Packed in bundle, standard seaworthy package or customers` requirements.
|
Application:
Construction project ,bridge and building etc.
If you have any questions, please contact with us directly.
Our company is solemnly committed to the majority of customers: reasonable price, short production cycle, considerate service. We look forward to cooperating with you.
Deformed Steel Rebar
Deformed Steel Rebar,Deformed Steel Bar,Deformed Steel Bar For Construction,Deformed Steel Bars
Shandong Vantage International Trade Co., Ltd. , http://www.steelplate.be