Thickness Range : 3-20 mm , Thickness error is ±0.3mm
Full Sheet Size : 1500 x 3000 mm (1480 x 3041),
 10+10 plate:1470 x 3062  1500 x 2000 mm (1480 x 2031),
 4+4 plate: 1480 x 2800 Special sizes can be customizedÂ
Special sizes can be customized.
Our Wear plate has following advantages:
1. Flat surface and nice outlooking                     2. Outstanding welding strength
3. Excellent wear resistance                               4. Excellent impact resistance
5. Easy processing                                                6. High Cost Performance
7. Comprehensive quality control.
Other Feature and Property
Chemical composition: hardfacing overlay steel plate are manufactured by welding one or multiple abrasion resistant layers on Mild steel (Q235, Q345) or stainless steel (SS 304, SS 309, SS 310)  base plate.
The overlay alloy has a high amount of chromium carbide hard particles.
Microstructure: The carbide (Cr7C3) volum fraction on the microstructure is above 50%.
Rockwell Hardness: Chromium carbide hard particles are distributed evenly throughout the layer, creating a strong microstructure,
The hardness is between HRC 57-62 and depend on the overlay's thickness: Overlay thickness over 10 mm. Hardness over 62 HRC.
Wear resistance: Our test shows that the Abrasion resistant performance of hardfacing overlay steel plate is 20 times higher than Mild steel and 8 times than heat treated steel.
Flatness tolerance: Flatness tolerance is ±3mm/m.
Thickness tolerance: Uniform overlay thickness, with tolerance within 0-0.3mm.
| Product Name | Welldam Wear Resistant Steel |
| Material | High chromium carbide overlay wear resistant steel |
|
         Thickness |
 4+4  5+3  6+4  6+5  8+4  8+6  8+8  10+4  10+6  10+8  10+10  12+4  12+6  12+8  12+10  14+6  14+8  14+10  16+6  16+8   16+10  16+12, etc.  or as customized |
| Weldable Thickness | 3-20mm |
|
  Hardness |
HRC 52-62 Wear deposite 3mm: HRC 52-58,  4mm: HRC 56-60, 5mm: HRC 58-62, 6mm: HRC 58-62,  8mm: HRC 58-62, 10mm: HRC 60-62, 12mm: >62 |
| HRC of 1st layer :52-58; HRC of 2nd layer: 58-62; HRC of Pure weld deposite: 62 | |
| Surface Treatment | Hardfacing clading coated. |
| Technique | Advanced automatic self-shilded open arc welding |
|
    Chemical Composition |
Take 6+6 wear resistant steel for example: C :  4.3-4.8%    Cr : 23-30%    Mn : 0.8-1.1%   Mo: 0.08-0.18  Ni:0.08-0.15 Other Metal elements : Micro |
| Â Base Plate | Q235B, All weldable steels, mostly structural steels. |
|
        Feature |
High wear resistance 12-20 times higher than common plate 5-10 times than low alloy steel plate 2-3 times than high chromium cast iron plate |
FAQ
1.Can we supply the sample ?
Yes,we can supply the sample.You can tell us the detail size.
2.Can we accept customize?
Yes,we can.We can manufacture as customer's requirement.You can send the CAD or drawing to us.
3.Quality problem?
According to the standard for production.And the products must pass the quality inspection department.We also accept Third Part Inspection.
4.Delivery time?
Prompt delivery for standard size,or under the contract.
5.Payment term?
Under the contract.
6.Other problem?
You can contact our customer service staff to ask help.
Contact person:Kathy Zhang
 Â
Mobile:0086-18012341499
Â
Thickness Range : 3-20 mm , Thickness error is ±0.3mm
Full Sheet Size : 1500 x 3000 mm (1480 x 3041),
 10+10 plate:1470 x 3062  1500 x 2000 mm (1480 x 2031),
 4+4 plate: 1480 x 2800 Special sizes can be customizedÂ
Special sizes can be customized.
Our Wear plate has following advantages:
1. Flat surface and nice outlooking                     2. Outstanding welding strength
3. Excellent wear resistance                               4. Excellent impact resistance
5. Easy processing                                                6. High Cost Performance
7. Comprehensive quality control.
Other Feature and Property
Chemical composition: hardfacing overlay steel plate are manufactured by welding one or multiple abrasion resistant layers on Mild steel (Q235, Q345) or stainless steel (SS 304, SS 309, SS 310)  base plate.
The overlay alloy has a high amount of chromium carbide hard particles.
Microstructure: The carbide (Cr7C3) volum fraction on the microstructure is above 50%.
Rockwell Hardness: Chromium carbide hard particles are distributed evenly throughout the layer, creating a strong microstructure,
The hardness is between HRC 57-62 and depend on the overlay's thickness: Overlay thickness over 10 mm. Hardness over 62 HRC.
Wear resistance: Our test shows that the Abrasion resistant performance of hardfacing overlay steel plate is 20 times higher than Mild steel and 8 times than heat treated steel.
Flatness tolerance: Flatness tolerance is ±3mm/m.
Thickness tolerance: Uniform overlay thickness, with tolerance within 0-0.3mm.
| Product Name | Welldam Wear Resistant Steel |
| Material | High chromium carbide overlay wear resistant steel |
|
         Thickness |
 4+4  5+3  6+4  6+5  8+4  8+6  8+8  10+4  10+6  10+8  10+10  12+4  12+6  12+8  12+10  14+6  14+8  14+10  16+6  16+8   16+10  16+12, etc.  or as customized |
| Weldable Thickness | 3-20mm |
|
  Hardness |
HRC 52-62 Wear deposite 3mm: HRC 52-58,  4mm: HRC 56-60, 5mm: HRC 58-62, 6mm: HRC 58-62,  8mm: HRC 58-62, 10mm: HRC 60-62, 12mm: >62 |
| HRC of 1st layer :52-58; HRC of 2nd layer: 58-62; HRC of Pure weld deposite: 62 | |
| Surface Treatment | Hardfacing clading coated. |
| Technique | Advanced automatic self-shilded open arc welding |
|
    Chemical Composition |
Take 6+6 wear resistant steel for example: C :  4.3-4.8%    Cr : 23-30%    Mn : 0.8-1.1%   Mo: 0.08-0.18  Ni:0.08-0.15 Other Metal elements : Micro |
| Â Base Plate | Q235B, All weldable steels, mostly structural steels. |
|
        Feature |
High wear resistance 12-20 times higher than common plate 5-10 times than low alloy steel plate 2-3 times than high chromium cast iron plate |
FAQ
1.Can we supply the sample ?
Yes,we can supply the sample.You can tell us the detail size.
2.Can we accept customize?
Yes,we can.We can manufacture as customer's requirement.You can send the CAD or drawing to us.
3.Quality problem?
According to the standard for production.And the products must pass the quality inspection department.We also accept Third Part Inspection.
4.Delivery time?
Prompt delivery for standard size,or under the contract.
5.Payment term?
Under the contract.
6.Other problem?
You can contact our customer service staff to ask help.
Contact person:Kathy Zhang
 Â
Mobile:0086-18012341499
Â
New Model Rebar Coupler,Rebar Coupler ,Rebar Connectors ,Threaded Rebar
Metal Forging Machinery Co., Ltd. , http://www.nbthreadmachine.com