Photoelectric factory clean room personnel code of conduct guide

Photonics workshop clean room personnel code of conduct guide (original link: http://)

Photoelectric factory clean room personnel code of conduct guide
File No		version number		Formulate	Review	Approve	effective date	page number	Controlled chapter
Document NO.		Edition NO.		Originator	Examiner	Approval	Effective	Page	Controlled stamp
OFNC-WI-TP-QA-078		A1		Zhang Chao	Wu Heng	Cai Huaxiong	2011-03-03	1/8
1. Purpose In order to keep the clean room within the cleanliness level required for the production of the product, the quality of our products is guaranteed by appropriate constraints and guidance on the activities of the employees. 2, the scope of adaptation All clean rooms in the factory 3. Management responsibility 3.1. Quality Assurance Department: responsible for the supervision and verification of clean room management. 3.2. Electrical and Mechanical Course: Maintenance of clean room equipment 3.3. Production Department: Maintain clean room cleanliness and ensure that clean room personnel follow the guidelines. 4, definition 4.1. Class 100 clean room: measure the cleanliness by the amount of dust particles, according to the size and quantity of dust particles floating in the clean room to the international standard. To define the cleanliness. According to the cleanliness level sampling comparison table, the particles in the 100-level clean room should be able to meet the particle diameter of 0.5 um. Less than 100 per cubic foot. 4.2. Thousand-level clean room: The particles in the clean room should be able to meet the requirements. The particles with a diameter of 0.5 um are less than 1000 per cubic foot. 4.3.Air shower: air bath, using a multi-faceted strong airflow to make the dust attached to the surface of the dust-free clothing fall into the bottom mesh or bottom. 5. Personnel management: 5.1. The clean room operators must pass the standard training of the clean room, and those who pass the test can enter the clean room. 5.2. Those who are allergic to chemical fiber and solvent are not allowed to enter the clean room. 5.3. All personnel entering the room should strictly abide by the various management systems of the clean room. 6. Daily attention for the personnel entering the room: 6.1. Take a bath and keep your body clean. Wash your hair frequently to prevent dandruff. 6.2. Wash your hands frequently, keep your hands clean and free of dirt. Change clothes and keep your clothes clean and tidy. 6.3. Cut your nails and keep your nails clean. Males shave and have a good haircut. 7. Into the clean room purification sequence: 7.1. All personnel entering the clean room must strictly implement the actual icon of Annex 1 and enter the clean room. 7.2. If foreigners (including VIPs and customers) need to enter the clean room, they need to fill in the “Guest to enter the control area application form”. After signing, you can enter
	Cleanroom Personnel Code of Conduct Guide
	File No		version number	Formulate	Review	Approve	effective date	page number	Controlled chapter
	Document NO.		Edition NO.	Originator	Examiner	Approval	Effective	Page	Controlled stamp
	OFNC-WI-TP-QA-078		A1	Zhang Chao	Wu Heng	Cai Huaxiong	2011-03-03	2/8
	8. Steps for personnel to exit the clean room 8.1. When exiting the clean room, exit to the locker room through the exit passage. Note that the two doors inside and outside the exit passage cannot be opened at the same time. Need to queue out of the clean room in turn. 8.2. Take off the dust-free shoes outside the side door, take off the dust-free cap, headgear, mask, clean clothes in the locker room, stack them in the locker, or put them in the locker. Hanging on the clothes rack. 9. In case of emergency, clean room 9.1. After the evacuation alarm sounds, leave the clean room through the nearest emergency exit (the emergency exit is only used in an emergency). 9.2. Try to turn off the power supply and dangerous materials, do not need to change clothes and change shoes, listen to the commander's arrangement on the spot, and evacuate the clean room in an orderly manner. 10. Requirements for clean room 10.1 When working in a clean room, the action should be light, and everything should be carried out according to the operation regulations. Jobs, no running, jumping, no play, no loud noise 10.2. Do not pull the static clothes zipper in the clean room, take the phone, wallet and any other personal items from the clothes. 10.3 Items that are not related to production and are prone to dust are not allowed to be brought into the clean room (eg pencil, eraser, fountain pen, fountain pen, correction fluid, Cigarettes, matches, lighters, diet, etc. are prohibited from being brought in) 10.4. All documents in the clean room must be clean paper or plastic. Personal notebooks, books, and manuscripts are forbidden to be brought in. 10.5. Before all materials enter the clean room, the outer box packaging must be removed. The outer packaging material must be wiped before entering the clean room. After blowing, etc., pass through the clean room transfer box, and it is forbidden to enter from the Air shower. 11. Management of clean room cleaning appliances/supplies: 10.1. Clean room cleaning tools must be cleaned with a dust-free cloth and a clean room-specific vacuum cleaner, and a fixed area should be placed to place the cleaning tool. (The cleaning product placement area should be away from the work area) 10.2. The cleaning work in the clean room should be carried out under the normal operation of the clean room, and the fan/air conditioner can not be stopped. 10.3. Cleaning appliances/supplies should be made of clean room special products. 10.4. Cleaning appliances/supplies mainly include: dust-free paper/dust-free cloth/dust-free mop, etc. 10.5 Clean water needs to be extracted from the clean room or at a designated location. It needs to be pure water. 10.6. The daily cleaning plan for the clean room is produced by the Production Department and the Quality Assurance Department.
	Cleanroom Personnel Code of Conduct Guide
	File No		version number	Formulate	Review	Approve	effective date	page number	Controlled chapter
	Document NO.		Edition NO.	Originator	Examiner	Approval	Effective	Page	Controlled stamp
	OFNC-WI-TP-QA-078		A1	Zhang Chao	Wu Heng	Cai Huaxiong	2011-03-03	3/8
	12. Management of clean clothing: 12.2. Clean clothing / dust cap / dust-free shoes / store in the locker room when not in use. 12.3. The cleaning period of clean clothes/dust-free hats/dust-free shoes is 1 time/3 days, and the contaminated ones should be cleaned in advance. 12.4. Cleaning of dust-free clothes/dust-free hats/dust-free shoes is strictly prohibited. Washing powder should be used instead. Dishwashing detergent should be used. Try to avoid hand washing, but use washing machine. 12.6 Cleaning of clean clothes/dust-free hats/dust-free shoes should avoid using tap water directly, but should use high-efficiency filtered water or pure water. 12.7 Clean clothes/dust-free hats/clean shoes should be dehydrated after cleaning, then hang in clean room or clean room, dry, not dry outdoors Or dry. The storage of clean work clothes for different operations and different grades should be strictly distinguished. 13. Management of auxiliary facilities such as work table/item placement rack: 13.1. Auxiliary facilities such as workbench/item placement rack used in clean room should be made of dustproof material or its surface is dustproof. 13.2. The material should not be placed directly on the ground, and should be placed at a position 35 cm above the ground. 14. Environmental monitoring of clean room environment: 14.1. The quality assurance personnel shall measure and monitor the clean room dust degree & wind speed every week. Record the dust degree and reveal it. Find an exception and need immediate feedback. 14.2. The production department needs to check the temperature and humidity daily, and find that the abnormality needs to be notified to the electromechanical class. 15. The overall supervision and management of the daily management of the clean room: 15.1. The company established the Cleanroom Authority, equipped with 5S management, and two parts of the transaction management for routine inspection, supervision and improvement, etc. 15.2.5S Commissioner, the clerk conducts daily audits based on the 5S audit check list and the clean room management audit form, and reports are sent out. 15.3. 5S Audit Ckeck list Form No.: TP-QA-078-001, Cleanroom Auditor: TP-QA-078-002 16. Clean room daily management reward and punishment mechanism: According to the rewards and penalties of the company management manual, the following reward and punishment mechanisms should be established for the plot: Violation of the plot Number of violations party Team leader Director / Director Monthly accumulation Director depaerment head Clean room 5S 1 time Oral education verbal warning / Missing number 1 Small Small 2 times written warning written warning / 3 times Penalty warning Small punishment Small punishment Lowest improvement rate Greater than Greater than 4 times Small punishment More punishment More punishment Management regulations room system 1 time Oral education verbal warning / Highest violation rate Number of times / total number of people Small Small 2 times Penalty warning written warning / 3 times Small punishment Penalty warning Penalty warning 4 times More punishment Small punishment Small punishment
	Cleanroom Personnel Code of Conduct Guide
	File No		version number	Formulate	Review	Approve	effective date	page number	Controlled chapter
	Document NO.		Edition NO.	Originator	Examiner	Approval	Effective	Page	Controlled stamp
	OFNC-WI-TP-QA-078		A1	Zhang Chao	Wu Heng	Cai Huaxiong	2011-03-03	4/8
	17. Wear the dust-free clothes step process: NO step Icon NO step Icon 1 Put on gloves 5 Anti-buttoned hood 2 Put on the hair cover 6 Buckle the enclosure 3 Wear a mask 7 Wear dust-free shoes 4 Wear a dust-free coat 8 Contrast mirror OK
	Cleanroom Personnel Code of Conduct Guide
	File No		version number	Formulate	Review	Approve	effective date	page number	Controlled chapter
	Document NO.		Edition NO.	Originator	Examiner	Approval	Effective	Page	Controlled stamp
	OFNC-WI-TP-QA-078		A1	Zhang Chao	Wu Heng	Cai Huaxiong	2011-03-03	5/8
	18. Enter the clean room AIR shower flow chart NO step Icon NO step Icon 1 Waiting for the red light next to the door, the yellow light enters 5 Tap the right arm Three times 2 Pat the head Three times 6 Three hips 3 Pat the neck Three times 7 Raise hands around Three circles 4 Pat the left arm Three times 8 Wait until the door is red, and push the door into the clean room. OK

Cleanroom Personnel Code of Conduct Guide
File No	version number	Formulate	Review	Approve	effective date	page number	Controlled chapter
Document NO.	Edition NO.	Originator	Examiner	Approval	Effective	Page	Controlled stamp
OFNC-WI-TP-QA-078	A1	Zhang Chao	Wu Heng	Cai Huaxiong	2011-03-03	6/8
19. Locker room personnel are not allowed to act:
Cleanroom Personnel Code of Conduct Guide
File No	version number	Formulate	Review	Approve	effective date	page number	Controlled chapter
Document NO.	Edition NO.	Originator	Examiner	Approval	Effective	Page	Controlled stamp
OFNC-WI-TP-QA-078	A1	Zhang Chao	Wu Heng	Cai Huaxiong	2011-03-03	7/8
20. Clean room personnel behavior: ten prohibitions
Cleanroom Personnel Code of Conduct Guide
File No	version number	Formulate	Review	Approve	effective date	page number	Controlled chapter
Document NO.	Edition NO.	Originator	Examiner	Approval	Effective	Page	Controlled stamp
OFNC-WI-TP-QA-078	A1	Zhang Chao	Wu Heng	Cai Huaxiong	2011-03-03	8/8
20. Attachment form: 5S audit Ckeck list form number: TP-QA-078-001 Cleanroom Inspection Form: TP-QA-078-002 List of audit missing: TP-QA-078-003 Modify history Serial number version number Modified date Reviser Modify content 1 AO 2011. 02.29 Zhang Chao Add a new standard 2 A1 2011.03..03 Zhang Chao New reward and punishment mechanism, and locker room/clean room are not allowed and ten prohibitions

Data reference (portal):

Air shower: http://

High efficiency air filter: http://

Clean room: http://

High efficiency filter leak detection: http://

Operating room purification project: http://

Cleanliness level standard: http://

Cleanroom testing standards: http://

Clean factory design specifications: http://

Cleanroom management system: http://

Clean room ventilation frequency standard: http://

Material of Sliding bar:	Brass
Surface treatment	Chrome plated
Material of Shower Holder:	Solid Brass
size:	different sizes for selection
Quality guarantee:	5 years
Salty Test:	ASS 24H
Package:	Inner packing: bag, white/brown inner box Outer packing:  kraft carton (The package also can be done as customer requirements.)
OEM/ ODM service:	laser logo on handle/body is available

 

Brass Sliding Kit

Brass Sliding Kit,Sliding Kit,Bathroom Brass Sliding Kit,Brass Shower Sliding Kit

KaiPing HuiPu Shower Metalwork Industrial CO,LTD , http://www.hp-shower.com