German research institute for solar energy and hydrogen energy Baden-Württemberg (ZSW) announced the development of a top performance lithium-ion battery.
According to a research report published by ZSW, such high-performance batteries have surpassed the current international cutting-edge technology in terms of the use of the important parameter "cyclic stability" of the validity period: a complete cycle of over 10,000 cycles can be realized.
After 10,000 complete discharges and discharges, 85% of production capacity remains
ZSW said that in terms of other attributes such as power density, the performance of this type of battery is comparable to that of currently leading Asian manufacturers. The active substances of this kind of battery only come from German enterprises. ZSW has designed the battery and developed a production process. After 18650 formats, ZSW made a small sample series.
ZSW researchers put electrode paste into blender
ZSW pointed out that this technology has created the basis for the manufacture of large pouch batteries and large square batteries. Lithium-ion batteries can be used in electric cars and solar energy storage systems.
Dr. Margret Wohlfahrt-Mehren, director of the Battery Materials Research Department, said: "After 10,000 charge/discharge cycles per hour, our lithium ion capacity was still more than 85%."
"This type of lithium-ion battery has an excellent lifetime."
For automotive companies, long service life is a basic requirement. Lithium-ion technology batteries can serve a car for at least 10 years, and the remaining energy of the battery will not be less than 80% of the rated value.
Other parameters are also outstanding
The other parameters of this type of battery are also extremely excellent. For example, the battery's power density (ratio of output power to its volume) is 1100 watts per kilogram, which is at an international level. For electric vehicles, this value means shorter charging times and excellent acceleration performance.
This type of small battery is semi-automatically produced at the ZSW Battery Technology Laboratory (eLaB) in Ulm, Germany and is jointly funded by the German Federal Ministry of Education and Research (BMBF) and the German Federal Ministry of Economics and Technology (BMWi). Such research contracts can enable interested companies to acquire new materials and processes without stopping production.
Further development and quality improvement of large batteries
In the next phase, ZSW researchers and engineers hope to work with industry partners to develop electrodes for large prismatic lithium batteries.
Margret Wohlfahrt-Mehrens said: "Before large-scale manufacturing of large-scale batteries, companies need to master the current cutting-edge battery technology." She believes that although the development of large-scale battery application technology is indispensable, but improving quality is also in principle important. (Translator: Krystal)
We have been setting benchmarks of success in the market as a prominent name of PCD combination Reamer. This reamer is used in construction work to ream a hole before drilling. The offered PCD Reamer is known for its rich attributes such as excellent cutting efficiency, low maintenance, corrosion resistant and durable construction. We manufacture this reamer at our sophisticated production unit, using best quality alloy steel. To provide the best range, we check this PCD Reamer on construction and durability parameters.
Choosing PCD combination reamer is very often the best way to reduce the total cost, using highly advanced PCD reamer can reduce the number of tools needed and increasing productivity, thus lowering your production unit costs considerably.
Advantages:
Unique guidepad geometry allows for excellent roundness and straightness, even in an interrupted cut condition.
Surface roughness is reduced obviously.
PCD Reamers type:
PCD End Mill Reamers
PCD Combination Reamers
Features:
Multi-diameter tool allowing for excellent hole size and concentricity between diameters.
Flexible in order quantity:
Samples can be provided before mass production, and MOQ can be discussed accordingly.
PRODUCT DETAIL:
product catagory :
PRODUCTING PROGRESS:
PAYMENT AND DELIVERY:
PRODUCT EQUIPMENT :
ABOUT US :
We are specialize in manufacturing PCD diamond tools and Carbide tools. Our major product inclulde PCD Inserts , PCD Reamers, PCD End Mills, PCD Taps, Cabide Inserts,Carbide Drills, Carbide Reams, Taps etc.,
we also offered customized cutting tools per drawings, and provide package according to customer requirements. We manufacture a series range of cutting tools for machining of Cast iron, Aluminium alloy and Non-Ferros metal, it is widely used in all major sectors like Automobiles, Engineering, Aerospace, Aviation and 3C industry. Premium quality of raw material is used in the production and strict examination during processing with advanced equipment, so our client are satisfied with our reliable quality and on-time delivery.
Our best selling of cutting tools include PCD Inserts, PCD End Mill , PCD Ball Nose Mill, PCD Reamer, Carbide Taps , Carbide End Mill, Special Form Cutter and many more. For these years we have been made a large forward in the technologies of manufacturing cutting tools. With high quality on performance and price, our product sells well both on domestic and overseas market. And we will always focus on the quality and best service, to make long business relationship.
quanlity control:
We have dedicated team of quality control and precise equipment to keep good and stable performance for our products and processing services.
PCD Combination Reamers
Combination Reamer,Drill Reamer,PCD Reamer Tools,PCD Combination Reamers
OPT Cutting Tools Co., Ltd. , http://www.optdiamondtools.com